NO2-4FD
search
NO2-4FD
search

SKU: NO2-4FD

Neutrik - NO2-4FD

Chassis connector with nickel plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact, waterproof acc. to IP65
115,50 €
- 37%

72,50 €

Pay in 4 interest-free payments of 18,13 € with Discover More

La quantité sélectionnée est supérieure à celle disponible en stock. Pas de problème ! Nous procéderons en vous envoyant immédiatement la quantité disponible. Nous vous enverrons ensuite le solde, sous 10 jours environ.
Unfortunately, the quantity you have selected exceeds the amount available in stock.
Condition : Neuf

Not available.

delivery is not available for this product.

Free shipping for orders over € 199 (within Europe)



Détails du produit

Features & Benefits

  • Suggested OEM equipment connector due to LC front compatibility
  • Designed as feedthrough with automatic sealing shutter
  • Shutter with silicone gasket protects optical connection from dust and dirt
  • Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
  • Accommodates standard LC connectors on the rear for simple installation
  • Connection on the front side either by rugged opticalCON or standard LC connector
  • The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
  • IP65 ingress protection in mated condition with SCDP-*
  • Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard: Multimode - black, Single mode PC - blue, Single mode APC - green

Product

  • Title NO2-4F
  • Gender F.

Electrical

  • Contact resistance < 7 mohm
  • Dielectric strength 1,5 kVDC
  • Insulation resistance > 2 Gohm (initial)
  • Rated current per contact 6 A
  • Rated voltage < 50 V (1)
  • Ground contact Faston 2.8 x 0.5 (soldering possible)

Mechanical

  • Insertion force < 45 N
  • Withdrawal force < 45 N
  • Lifetime > 5000 mating cycles
  • Locking force 1000 N
  • Wiresize
  • Locking device Push-Pull
  • Mounting direction Front mounting
  • Chassis shape D

Material

  • Contacts Bronze (CuSn6)
  • Insert Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR)
  • Shell Zinc diecast (ZnAl4Cu1)
  • Shell plating Nickel
  • Split sleeve ceramics

Environmental

  • Temperature range -40 °C to +75 °C

Optical

  • Insertion loss < 0.4 dB / connection
  • Optical connector LC-Duplex Feedthrough

 

More.. Show less
Product already in wishlist
Produit ajouté à la liste de souhaits