NovaStar - VX1000

Input Connectors

3G-SDI:

• ST-424 (3G), ST-292 (HD) and ST-259 (SD) standard video inputs supported
•  Max. input resolution: 1920×1080 @ 60 Hz
• Deinterlacing processing supported
• 3G-SDI loop output supported
• DOES NOT support input resolution and bit depth settings 

HDMI 1.4 X2:

• Max. input resolution: 3840×1080 @ 60 Hz or 3840×2160 @ 30 Hz
• HDCP 1.4 compliant
• Interlaced signal inputs supported
• Mosaic of two HDMI 1.4 inputs supported
• Custom resolutions supported − Max. width: 4092 pixels (4092×1136 @ 60 Hz) − Max. height: 3981 pixels (1060×3981 @ 60 Hz)
• Loop output supported on HDMI 1.4 1

DVI (HDMI 1.4) X2:

• Max. input resolution: 3840×1080 @ 60 Hz or 3840×2160 @ 30 Hz
• HDCP 1.4 compliant
• Interlaced signal inputs supported
• Custom resolutions supported − Max. width: 4092 pixels (4092×1136 @ 60 Hz) − Max. height: 3981 pixels (1060×3981 @ 60 Hz)
• Mosaic of two DVI inputs supported

Output Connectors

Ethernet ports X10: Gigabit Ethernet ports

• Max. loading capacity: 6.5 million pixels
• Max. width: 10,240 pixels
• Max. height: 8192 pixels Ethernet ports 1 and 2 support audio output. When you use a multifunction card to parse the audio, be sure to connect the card to Ethernet port 1 or 2

HDMI 1.3 

• Support monitor and video output modes.
• The output resolution is adjustable

OPT X2: 10G optical fiber ports

OPT 1: Self-adaptive, either for video input or for output

• When the device is connected with a fiber converter, the port is used as an output connector.
• When the device is connected with a video processor, the port is used as an input connector.
• Max. capacity: 1x 4K×1K @ 60 Hz or 2x 2K×1K @ 60 Hz video inputs 

OPT 2: For output only, with copy and backup modes

• OPT 2 copies or backs up the output on 10 Ethernet ports

ETHERNET: Connect to the control PC or router.

USB X2:

USB 2.0 (Type-B):

• Connect to the control PC.
• Input connector for device cascading

USB 2.0 (Type-A): Output connector for device cascading

GENLOCK IN-LOOP: Connect to an external sync signal. Accepts bi-level and tri-level signals.

• IN: Accept the sync signal.
• LOOP: Loop the sync signal