SKU: H9673

EAN: 3662009002026

Audiophony - Ti500

Name: Ti500
Brand: Audiophony
SKU: H9673
Price: 366 EUR
Availability: InStock

2 channels power amplifier, 2 x 250 W on 4 ohm, Class-D, 1U rack

(0)

533,00 €

- 31%

366,00 €

(IVA esclusa)

Pay in 3 interest-free payments of 122,00 € with Discover More

items in stock in our European supplier's warehouse

Unfortunately, the quantity you have selected exceeds the amount available in stock. No problem! We will go ahead and send you the available quantity. We will then send you the reminder approximately within ten days.

Unfortunately, the quantity you have selected exceeds the amount available in stock.

366,00 €

Condizione: Nuovo

Ordina ora e ricevilo

Da 17-08-2026 fino al 18-08-2026

con DHL Worldwide Express

Available

delivery is available for this product.

This item is currently in stock and will be shipped from our supplier's warehouse in Europe.

La spedizione gratuita per tutti gli ordini uguali o superiori a 199 € è limitata alle spedizioni all'interno dell'Europa

Varianti di questo prodotto

JB Systems - AMP100.2 Mk2

229,00 €

(0)

2 x 100 W @ 4 ohm Class-D power amplifier, 1U rack

HPA - DA-300

190,00 €

(0)

Lightweight 1U Class‑D power amplifier, 2 x 300 W RMS @ 4 ohms or 600 W in bridge mode, full protection circuitry, active fan cooling

Synq - SE-1100

322,50 €

(0)

Professional audio amplifier 2 x 550 W RMS @ 4 ohm

HPA - HYBRID-6C

1.081,50 €

(0)

6 x 400 W RMS on 8 ohms hybrid Class-D power amplifier, low impedance and 100 V, parallel and bridge modes

LONE AUDIO - LA-1600AMP

498,50 €

(0)

2 x 500 W on 4 ohm Class-D main amplifier, it can operate in parallel or bridge mode

Dettagli Prodotto

Amplificatore audio stereo professionale. Appartiene alla Serie Ti, 2x250 W su 4 ohm. 500 W in modo bridge mono. Quando il silenzio è un fattore molto importante, puoi fare affidamento sul Ti 500 che lavora in modo estremamente silenzioso. Ciò rende questo amplificatore perfetto per gli studi di registrazione, installazioni permanenti e teatri. Questi amplificatori di classe D sono dotati di unità SMPS e offrono una riproduzione del suono perfetta nonostante le dimensioni ultracompatte. Equipaggiato conVari tipi di connessione, si adatta perfettamente a qualsiasi sistema audio, studio e persino applicazioni HiFi. E' inoltre dotato di protezioni termiche ed elettroniche, in modo da poterlo usare in completa sicurezza e serenità.

OVERVIEW

Class-D amplifier
Switched-mode power supply
Mode selection: Stereo, Bridge or Parallel
Independent limiter for each channel
Extremely accurate and independent level settings for each channel
LEDs indicators
Convection cooled
Balanced Jack TRS and XLR inputs
Unbalanced RCA outputs
Binding post-jacks or speakON® outputs
Short-circuit, over current and high temperature independent protections for each channel
2x19'' rack mount spaces

Technical specifications

Stereo Max power: 4 O RMS stereo power (minimum): 2 x 250 W RMS; 8 O RMS stereo power: 2 x 130 W RMS
Mono bridged Max power: 8 O bridged power (minimum): 1 x 500 W RMS
Signal-to-noise ratio Less than 90 dB
Input sensitivity: 4 dBu +/-2 dB
Distortion: THD at 1 kHz 1/2 rated power Less than 0.1%; Slew rate: - 65 dB at 1 kHz;
Frequency response (4 O/1 W): +0.5 dB ; 20 Hz-20 kHz
Input impedance: unbalanced 15 kO / Balance 30 kO
Clip: 0 dBr
Cooling: Convection cooled
Input connectors: XLR3-F, Balanced 6.35 mm TRS-F jack + Unbalanced RCA
Output connectors: Binding post-jacks + 4-pole speakON®
Front control panel: AC power switch, Channel 1 and 2Volume
Rear control panel: Mode selection button
Indicators: Protect (red) / Clip (yellow) / Signal (green)
Protections: Short-circuits, over current and high temperature protected
Power supply: 100/230 V_AC - 50/60 Hz
Dimensions: 482 mm x 44 mm x 330 mm
NetWeight: 4.7 kg