NovaStar - H_4×OPT sending card

Output card for H15 and H20: 4 x 10G OPT. Supports SFP single-mode and multi-mode

(0)

4.488,50 €

- 38%

2.802,50 €

(IVA esclusa)

Unfortunately, the quantity you have selected exceeds the amount available in stock. No problem! We will go ahead and send you the available quantity. We will then send you the reminder approximately within ten days.

Unfortunately, the quantity you have selected exceeds the amount available in stock.

Condizione: Nuovo

Enim quis fugiat consequat elit minim nisi eu occaecat occaecat deserunt aliquip nisi ex deserunt.

Non disponibile

spedizione non disponibile per questo prodotto.

La spedizione gratuita per tutti gli ordini uguali o superiori a 199 € è limitata alle spedizioni all'interno dell'Europa

Varianti di questo prodotto

NovaStar - H_16xRJ45+2xFiber sending card

1.432,50 €

(0)

16x RJ45 + 2x Fiber output card for Novastar H Series H2/H5/H9/H15 video wall splicers

NovaStar - H_2xRJ45+1xHDMI1.3 preview card

1.073,50 €

(0)

2x RJ45 + 1x HDMI 1.3 preview card for Novastar H Series H2/H5/H9/H15 video wall splicers

NovaStar - H_20xRJ45 sending card

1.482,00 €

(0)

20x RJ45 output card for Novastar H Series H2/H5/H9/H15 video wall splicers

PIXELHUE - Q8_Output Process Card

5.177,50 €

(0)

VPU card, required for interfacing output Q_HDMI2.0+12G-SDI+fiber output card

Dettagli Prodotto

Scheda di uscita per Video wall splicer H15 e H20 con 4 porte ottiche OPT 10G. Può caricare fino a 20.800.000 pixel (larghezza massima 16.384 pixel, altezza massima 16.384 pixel). Modalità SFP singola e multipla.

Sono supportati entrambi i moduli ottici SM (mono-modali) e MM (multi-modali), con una distanza di trasmissione fino a 10 km, uscite a 8 e 10 bit. Incapsulamento SFP+ per il modulo ottico.

Le specifiche del modulo supportato includono quanto segue:

Modulo ottico 10G SFP+ SR
Modulo ottico 10G SFP+ LR

Technical characteristics

Independent, copy and backup modes are supported
Independent: 4 OPT ports are all used for output and have the same loading capacity. The loading capacity of one port is equal to that of 8 Ethernet H20 Video vall splicer Specifications www.novastar.tech 17 ports
Copy: OPT 1 and OPT 2 are used for main output. OPT 3 copies the output on OPT 1, while OPT 4 copies the output on OPT 2
Backup: OPT 1 and OPT 2 are used for main output. OPT 3 serves as the backup of OPT 1, while OPT 4 serves as the backup of OPT 2.
Power consumption: 39 W
Dimensions: 193 × 247.12 × 21.15 mm
Weight: 500 g
Notes:
- Four 10G SFP+ LR optical modules are included with the card and are already installed into the OPT ports
- When the screen is loaded by the H_4xfiber sending card, the preset transition effect supports cut only
- When the screen is loaded by the H_4xfiber sending card, NovaLCT V5.4.4.6.CRM7401 is required for screen configurations