WA-4X3
search
WA-4X3
WA-4X3
WA-4X3
WA-4X3
search

SKU: H9066

EAN: 3662009002088

Audiophony - WA-4X3

4 channels power amplifier, 4 x 200 W RMS on 8 ohm, 2 x 600 W bridged stereo
941.00 €
- 37%

596.00 €

Pay in 4 interest-free payments of 149.00 € with Discover More

items in stock in our European supplier's warehouse

Unfortunately, the quantity you have selected exceeds the amount available in stock. No problem! We will go ahead and send you the available quantity. We will then send you the reminder approximately within ten days.
Unfortunately, the quantity you have selected exceeds the amount available in stock.
596.00 €
Condition: New

Available

delivery is available for this product.

This item is currently in stock and will be shipped from our supplier's warehouse in Europe.

Free shipping for orders over € 199 (within Europe)



EN Instruction Manual (2.5MB)

Documentation

FR Manuel d'instructions (2.5MB)

Documentation

EN Instruction Manual (2.5MB)

Documentation

FR Manuel d'instructions (2.5MB)

Documentation

EN Instruction Manual (2.5MB)

Documentation

FR Manuel d'instructions (2.5MB)

Documentation

Product Details

4-channel final amplifier with 4 x 300 WRMS into 4 ohm and 4 x 200 WRMS into 8 ohm. Possibility of bridge operation, with delivery of 2 x 600 WRMS into 8 ohm. The amplification stages are Class-AB, just like the power amplifiers for Hi-Fi use. Powerful low leakage flux toroidal transformer.

Level adjustment and independent bass / treble tone controls for each channel, LEDs for signal presence, clipping, protection, bridge operation. Great versatility of operation in 2x2, 2+1 or 4x1 configurations. Possibility of operation also in Bus Mode: in this mode, the signal sent to the Bus input is amplified by all 4 output channels.

XLR input connectors and screw output connectors for banana speaker plugs.

Technical characteristics

Power output RMS at 8 ohm 4 x 200 W
Power output RMS at 4 ohm 4 x 300 W
Power output RMS stereo-bridged at 8 ohm 2 x 600 W
Power output RMS 1 bridged and 2 stereo at 8 ohm 1 x 600 W + 2 x200 W
Sensitivity at 8 ohm rated power 0.775 mV
Frequency response (1 W) 20 Hz - 25 kHz (+0 dB, -0.5 dB)
Frequency response 20 Hz - 20 kHz
Phase response (1 W) 20 Hz - 20 kHz (+10°, -20°)
Signal to noise ratio below rated power A-weighted > 100 dB
THD (20 Hz - 20 kHz) < 0.1%
Intermodulation distortion (IMD) at 60 Hz and 7 kHz at 4:1, from full rated output to -35dB < 0.05%
Damping factor at 8 ohm from 20 Hz to 400 Hz > 200
Input impedance (nominally balanced) 20 kohm
Input impedance (nominally unbalanced) 10 kohm
Max load impedance, 4 channels 4 and 8 ohm
Max. load impedance, stereo bridged 8 ohm
Power supply 220 - 240 VAC 50/60 Hz
Fans   proportional speed
Cooling system front to rear forced ventilation
AC line current 8 A (both amplifiers do not consume more than 90 W when inactive)
Dimensions 483 x 375 x 89 mm
Net weight 16 kg
Shipping weight 19 kg
More.. Show less
Product already in wishlist
Product added to wishlist