An essential effect for stage lighting. The SunBar103 W is a 10 x 3 W LEDs bar adapted to any kind of situation. Its 17-pixel effect programs can be accessed automatically or via the DMX menu, thanks to its 5 modes. Its strong chassis, its fixation bracket and its very complete panel of connectors ensure the SunBar103 W is as easy to set up and use as possible. With an electricity unit consumption of only 36W, decreasing the power of your effects and limiting the number of products because of electrical restrictions is now over. This major asset allows you to multiply special effects, should it be for installations or stages.
- Pixel effect
- Individual LED control
- 17-Pixel sequence programs
Light sources
- 10 x 3 W Warm white LEDs
- Low temperature, low power consumption, can operate non-stop for many hours
Effects
- 17 pixel sequence programs with adjustable speed or music-sensitivity
- Stroboscope at adjustable speed
- Music-sensitive flash effect
- Adjustable electronic dimmer from 0 to 100%
Control
- Standard DMX-512
- 1, 3, 5, 10 or 15 DMX channels
- Built-in music-sensitive shows (internal mic)
- Simplified control of several units in Master/Slave mode
- Drown-dop display for assignation and mode selection
Additional characteristics
- Powercon® lN/OUT sockets
- 3-pin DMX IN/OUT sockets
- Fixation bracket for hooks
- Power consumption: 36 W max.
- Power supply: 100 - 230 VAC 50/60 Hz
- Dimensions: 999 x 170 x 50 mm
- Net weight: 3,4 kg
Package contents
- The projector
- The user guide
- One IEC / Powercon© power cord