Evolite - Infinium 6600 RGB

High-end professional Pure Diode laser, class 4, with analogue RGB modulation, high speed galvo scan, ideal for graphics, logo projection, volumetric effects and for creating surprising and captivating light shows. With its red, green and blue color sources, this laser produces a total power of 6600 mW, with an extremely low divergence of less than 1.2 mrad. The beam size is less than 4 x 2 mm and the maximum beam angle is 60°. Evolite Infinium 6600 RGB offers 13 or 25 channel DMX modes. Enables very high speed galvo scans of 35 kpps @ 8° for smooth and precise movements. In the event of a failure of the mirror motors, the "Scan Fail Safety" system automatically switches off the laser for maximum safety. The two-part housing with ATS technology provides additional protection for dust-sensitive components. Buttons for dimming each source are located on the rear panel, with the laser output on the front. The safety key to block the laser ignition and the interlocking connector for the remote stop button (optional) ensure safe operation.

• Pure Diode sources: red 638 nm / 1700 mW, green 520 nm / 1800 mW, blue 445 nm / 3100 mW
• Total power: 6600 mW
• Total power measured in optical output: 6378 mW
• Power per source measured at optical output: 1590 mW green, 1578 mW red, 3210 mW blue
• Extremely low divergence < 1.2 m rad
• Beam size: < 4 x 2 mm
• Projection angle max.: 60°
• Analog modulation
• Class 4
• Galvo Scans 35 kpps @ 8°
• 13 or 25 channel DMX Modes
• ILDA IN / OUT interface
• "Scan Fail Safety" system that switches off the laser automatically in the event of a mirror motor fault
• Interlock connector for remote stop button (optional)
• Pan & Tilt inversion option
• Light intensity adjustment buttons for each source on rear panel
• laser beam output LED on front
• Safety key to lock ignition of laser
• Supply voltage: 100 - 240 V_AC 50/60 Hz
• Case in 2 parts, for the protection of dust - sensitive components (ATS Technology)
• Dimensions: 270 x 278 x 190 mm
• Weight: 10.4 kg