Outline - L3000
Not available.
delivery is not available for this product.
Free shipping for orders over € 199 (within Europe)
Variants of this product
260.00 €
500.00 €
203.50 €
331.00 €
341.00 €
Watch it in action
Product Details
The L3000’s four channels of amplification combined with internal DSP provide the perfect solution for many applications. The flexible two, three or four channels format is ideal for installations but also for portable systems. Up to 3000 W in a really compact chassis, weighing just 3,4 kg/ 7,5 lb, L3000 is a flexible, cost-effective solution for small sound system. This amplifier offer small dimensions, light weight and the traditionally amazing sound quality and reliability of all Outline products. The L3000 can deliver up to 750 W per channel at 4 ohm or 1500 W in bridge mode at 8 ohm. Outline amplifiers deliver crystal-clear highs, and a tight, well-defined low end. Proven design features ensure extremely high performance in terms of super low total harmonic distortion, optimal frequency response and damping factor across a vast number of application scenarios. The PWM output stage allows to transform all the energy drawn from the main into usable power and offers maximum performance, high predictability and immunity from intermodulation artifacts. All output connections are made via speakON connectors. Both bridge as well as single channel output connection modes are available. The channels A, B, C and D can be set only in single-ended, E and F in bridge mode. The amplifier offer 4 presets, which change the routing of the signal. The amplifier comprises a range of functions that can be setup manually using Armonía Plus, amplifiers’ management software, which offers control of parameters such as levels, delay, polarity and Input EQ. You can connect the amplifier using USB port on the front panel. L3000 amplifier can be mounted in two rack units (19" x 3.5", 483 mm x 88 mm) with the appropriate hardware. Using this accessory it is possible to mount two L3000 side by side or even only one amplifier.
- Class D Power Amplifier
- 4 CHannel Amplifier
- 2 Input
- PWM Output Stage
- 4 Selectable Preset
- Wooden Chassis
- Ultra Light-Weight
PERFORMANCE SPECIFICATIONS
Number of channels |
4 |
Output power |
Single channel mode: 4 x 750 W @ 4 ohm Bridge mode: 2 x 1500 W @ 8 ohm (or 1 x 1500 W @ 8 ohm + 2 x 750 W @ 4 ohm) |
Max output voltage |
Single channel: 78 Vpeak; Bridge: 156 Vpeak |
Max output current |
Single channel: 30 Apeak; Bridge: 30 Apeak |
AC Main Power |
Universal, Regulated switch mode with PFC (Power Factor Correction) Operating voltage: 100 V – 240 V ±10%, 50-60 Hz |
Power consumption |
Standby: < 1 W (with an aux load < 100 mW) Idle: ≤ 10.2 W @ 100-240 VAC Rated Load (1/4 Max Power): 700 W |
Gain | 26 dB |
Frequency response |
20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 ohm |
S/N Ratio |
>115 dB (20 Hz - 20 kHz, A weighted) |
Crosstalk separation |
>80 dB @ 1 kHz |
THD+N |
<0.08% from 1 W to half power (typically <0.05%) |
Noise floor |
-80 dBV (20 Hz – 20 kHz, A-weighted) |
Input sensitivity |
11 dBu |
Input impedance |
4,5 k ohm balanced |
Damping factor |
>500 @ 1 kHz |
Integrated DSP |
Input EQ, Delay, Gain... |
PHYSICAL SPECIFICATIONS
Input connector |
2 x XLR-F – Analog signal input |
Network connector |
USB type B |
Output connector |
6 x speakON |
Height |
87,5 mm - 3 1/2" |
Width |
210 mm - 8 1/4" |
Depth |
320 mm - 12 5/8" |
Weight |
3,4 kg - 7,5 lb |