Allcolor - Aluminium Tape 910-50

Type 910 consists of a pure aluminium foil, that is on one side coated with an aggressive acrylic glue of low flammability. The special advantages of this glue are its high adhesive power and shear resistance, with good ageing resistance. The adhesive side is covered with a silicone paper, that serves as separating layer, which needs to be removed prior to application of the tape. The tape does not oxidize nor shrink, does not expand nor does it get statically loaded. Type 910 is water and vapour proof, diffusion dense and abrasion proof. Specification according to DIN 4102 Class B1. Type 910 is used in the field of air-conditioning, heating and sanitary technology for insulation against heat and cold, as barrier material and vapour barrier, as well as for lagging of pipelines, heating- and fresh-air conduits. The tape serves for masking and lagging of insulation materials, such as aluminium foil, glass-wool, mineral wool, felt and foam material. Moreover tape 910 is applied as heat and light reflector and for masking of welded seams and joints. Temperature resistance: 100°C. Roll lenght: 50m. Color: grey

Width	50 mm
Length	50m
Rolls / Carton	24 rolls

Backing	aluminium-foil
Release	paper silicone paper
Carrier thickness	30 µ
Total thickness	60 µ
Elongation at break	6 %
Adhesion on steel	3,4 N/cm
Tensile strength	20 N/cm
Adhesive	acrylic
Temperature resistance	up to 100° C
Core diameter	76 mm
Color	silver