Audiophony - MOJO500LineTWS

MOJO500Line TWS is a light and compact active loudspeaker consisting of a column and a subwoofer which also acts as a support base for the column. This speaker system is equipped with 6 full range drivers of 2.75" each and an 8" woofer with amplifier module of 500 W max. total (LF + HF). The numerous available inputs allow you to connect a microphone or keyboard to channel 1, a guitar or microphone on channel 2, an auxiliary line source or a Bluetooth input on channel 3. 3 channel mixer included.

Thanks to TWS (True Wireless Stereo) technology, the electronics contained in the subwoofer will take care of transmitting the audio signal to a second MOJO for stereo listening.

The controlled orientation of the 6 speakers in the column allows a dispersion of 120° horizontally and 20° vertically; such narrow vertical dispersion makes the system suitable even for difficult acoustic situations. The column is mounted directly on the subwoofer thanks to the contact slot. The latter guarantees the continuity of the audio signal between the column and the subwoofer, without the need to use any connection cable.

Technical characteristics

Column

• Power: 100 W_RMS – 200 W max.
• Frequency response: 180 Hz – 20 kHz
• SPL max. (@ 1 m): 116 dB
• Nominal impedance: 4 ohms
• Speakers: 6 x 2.75" full range
• Dispersion: 120° x 20° (H x V)
• Connector: integrated in the base
• Dimensions: (80 x 80 x 830 mm) x2
• Net weight : 2.45 kg + 1.20 kg = 3.65 kg

Subwoofer

• Power: 150 W_RMS, 300 W max.
• Frequency response: 50 – 200 Hz
• SPL max. (@ 1 m) : 116 dB
• Nominal impedance: 4 ohms
• Woofer: 8"
• Dimensions: 340 x 430 x 400 mm
• Net weight: 10.8 kg

Amplification

• Bass stage: 1 x 150 W_RMS / 300 W max. Class-D, 4 ohm
• Mid/high stage: 1 x 100 W_RMS / 200 W max. Class D, 4 ohm
• Inputs: 
  • CH1 : 1 x Combo XLR/Jack MIC/line
  • CH2 : 1 x jack guitar/MIC
  • CH3 : 1 x RCA L/R line + 1 x jack 3,5 mm aux stereo input + Bluetooth 5.0 TWS input
• Outputs:
  • 1 x slot-in on the top of the box
  • 1x XLR L+R or only R for output to another system in mono or stereo
• DSP: compressor on microphone channels
• Level: levels adjustment on each channel
• Treble: mid/treble level adjustment
• Sub: subwoofer level adjustment