Blackmagic Design - Blackmagic 2110 IP Converter 4x12G PWR

19” rack format converter designed to integrate SMPTE-2110 IP video into 12G-SDI broadcast equipment. This standard (SMPTE ST-2110) developed by SMPTE, defines the transport and synchronization of 10-bit video, audio and auxiliary data over broadcast IP networks intended to replace SDI (Serial Digital Interface).

Uses 4 independent 12G-SDI to SMPTE-2110 bidirectional IP video converters and 10G Ethernet RJ45 connections; this ensures fast power supply to each 10G Ethernet connection, for example to connect 4 Blackmagic Studio Camera 6K Pro simultaneously. Each channel has a 12G-SDI input, but there is also a 12G-SDI input for the return of the program that broadcasts on all channels.

It has 5 SDI inputs in total (4 SDI video + main PGM input), 4 SDI video outputs + 1 SDI Main Program Loop Out, 16 audio IN/OUT embedded on SDI. It includes PTP (Precision Time Protocol) clocking for precise synchronization between devices.

The addition of this converter to an existing professional SMPTE-2110 broadcast system offers the great advantage of being able to transform all video equipment into SMPTE-2110 at low cost: simply connect the device to live production switchers, recorders on disk, streaming processors, cameras, TVs and more. Using simple network cables you get the benefits of SMPTE-2110 IP video, remote power and bi-directional video, just like you would with an SDI workflow.

Features a dual internal 100 - 240 V_AC 50/60 Hz power supply for redundancy.

Technical characteristics

Connections

• Total SDI inputs: 5
• SDI video inputs: 4
• SDI main program inputs: 1
• Total SDI outputs: 5
• SDI video outputs: 4
• SDI main program outputs: 1 loop out
• SDI rates: 270 Mb, 1.5G, 3G, 6G, 12G
• SMPTE ST-2110 IP video inputs: 4 x 10G Ethernet
• SMPTE ST-2110 IP video outputs: 4 x 10G Ethernet
• Analog audio outputs: 1 x 6.35 mm headphone socket
• SDI audio inputs: 16 CH embedded audio on SDI input
• SDI audio outputs: 16 CH embedded audio on SDI loop output
• SMPTE ST 2110 IP audio inputs: 16 CH embedded audio on ST-2110 IP video via 10G Ethernet
• SMPTE ST 2110 IP audio outputs: 16 CH embedded audio on ST-2110 IP video via 10G Ethernet
• Multi rate support: auto detection of SD, HD, Ultra HD and 4K
• Reclocking: yes
• Ethernet: 4 x 10 Gb/s RJ45 PoE++ connectors supporting 10/100/1000/10G BASE-T for SMPTE 2110 IP video in and out. PoE++ is power output only for powering connected PoE devices such as Blackmagic cameras and converters. 1 x 1 Gb/s RJ45 connector supporting 10/100/1000 BASE-T for configuration and firmware updates.
• Computer interface: 1 x USB-C 3.0 for configuration and firmware updates

SDI video standards

• SD video standards: 525i 59.94 NTSC, 625i 50 PAL
• HD video standards: 720p 50, 720p 59.94, 720p 60, 1080i 50, 1080i 59.94, 1080i 60, 1080p 23.98, 1080p 24, 1080p 25, 1080p 29.97, 1080p 30, 1080p 47.95, 1080p 48, 1080p 50, 1080p 59.94, 1080p 60, 1080PsF 25, 1080PsF 29.97, 1080 PsF30
• Ultra HD video standards: 2160p 23.98, 2160p 24, 2160p 25, 2160p 29.97, 2160p 30, 2160p 47.95, 2160p 48, 2160p 50, 2160p 59.94, 2160p 60
• 4K video standards: 4Kp 23.98 DCI, 4Kp 24 DCI, 4Kp 25 DCI, 4Kp 29.97 DCI, 4Kp 30 DCI, 4Kp 47.95 DCI, 4Kp 48 DCI, 4Kp 50 DCI, 4Kp 59.94 DCI and 4Kp 60 DCI

SDI compliance

• SDI video rates: SDI video connections are switchable between standard definition, 720p, 1080i, 1080p, 2K DCI, Ultra HD and 4K DCI
• SDI color precision: 4:2:2
• SDI color space: YUV
• SDI auto switching: automatically detects SD, HD, 2K DCI, Ultra HD and 4K DCI. Level A and B is automatically detected on 3G-SDI input and user selectable on 3G-SDI output

IP video compliance

• SMPTE 2110-20 (uncompressed video): IGMP v2
• SMPTE 2110-21 (traffic shaping):
  • Sender: narrow
  • Receiver: narrow, wide synchronous, asynchronous
• SMPTE 2110-30 (PCM): audio conformance level C
• SMPTE 2110-40 (ancillary data): full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadata
• Codec: Blackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP video
• PTP (Precision Time Protocol): IEEE 1588-2008 (PTP v2), ST 2059-1, ST 2059-2
• NMOS IS-04 discovery and registration: v1.3.2, peer-to-peer via mDNS/DNS-SD
• NMOS IS-05 connection management: v1.1.2
• NMOS BCP-002-01: natural grouping
• NMOS BCP-004-01: receiver capabilities

Audio

• Front panel audio monitor speaker with speaker control button, plus 6.35 mm headphone socket

Control

• Built in control panel, 12 button control panel, 2.2” color display and spin knob for setup and menu settings

Operating systems

• Mac 13.0 Ventura, Mac 14.0 Sonoma or later, Windows 10 and 11

Power requirements

• Power supply: 2 x internal 100 ‑ 240 V_AC 50/60 Hz with IEC C14 mains input
• Power usage: TBA

Environmental specifications

• Operating temperature: 5 to 40 °C 
• Storage temperature: -20 to 45 °C 
• Relative humidity: 0 to 90% non-condensing

Physical specifications

• Dimensions: 48.3 x 4.4 x 23.4 cm
• Weight: 3.7 kg

What's in the box

Blackmagic 2110 IP Converter 4x12G PWR, welcome wallet with QR code for software download