Blackmagic Design - Blackmagic MultiView 4

MultiView 4 by Blackmagic Design is a multi viewer that lets you monitor four completely independent SDI video sources on a single display! MultiView 4 lets you monitor any combination of SD, HD and Ultra HD video formats and frame rates all at the same time with four full re-syncronized 6G-SDI inputs. You connect it to either regular HD or Ultra HD televisions thanks to it's ability to output to both 1080 HD and 2160p Ultra HD, so you can take advantage of the extra resolution of Ultra HD and see full resolution 1920 x 1080 HD in each view for incredible sharpness! You can even turn on audio meter overlays, custom labels and more in each view!

• Multi-source monitoring on a single screen.
• 4 6G-SDI inputs with frame synchronisation.
• Ideal for viewing multiple signals at the same time.
• SD, HD and Ultra HD up to 2160p30.

Connections

SDI Video Inputs 4 x 10-bit SD-SDI, HD-SDI and 6G-SDI.

SDI Video Outputs 4 loop, 1 HD/Ultra HD.

SDI Rates 270Mb, 1.5G, 3G, 6G.

SDI Video Multi View Outputs 1 x 10-bit HD-SDI and 10 bit 6G-SDI

HDMI Video Multi View Outputs 1 x HDMI type A connector. Output supports EDID of the monitor.

SDI Reclocking On all SDI outputs, auto switching between standard de nition, high de nition or 6G?SDI video.

Reference Input None

Multi Rate Support Auto detection of SD, HD or 6G-SDI. Simultaneous viewing of 4K, HD and SD video.

Updates USB 2.0 high speed (480Mb/s) interface or via Ethernet.

Configuration RJ45 Ethernet or USB 2.0 for rmware updates and IP address setting.