celexon - 1000006232

The CLR (ceiling light rejecting) frame screen from celexon's HomeCinema series is a high contrast screen specially optimised for ultra-short throw (UST) projectors.

It combines the advantages of current displays with the size of a projection screen. The specially developed "retroreflective" projection screen fabric provides unprecedented contrast, black level, brightness and vivid colors under daylight or ambient light conditions. With these features, the dream finally comes true - the projection screen becomes a TV replacement!

At the same time, celexon's HomeCinema CLR-UST fabric achieves outstanding color values and color fidelity.

The viewing angle of 140° is extremely wide for this type of screen fabric and 0.5 gain achieves an impressive perceived brightness, black level and contrast due to the special bundling of the incident light and reflection in the direction of the viewer.

This makes celexon's CLR-UST fabric one of the best ultra-short distance high contrast fabrics on the market and unique at this price point.

The extremely narrow frame, only 12 mm wide, has a matte black finish all around and builds up only minimally over the surface of the screen. This eliminates any edge reflections and creates the impression of a 100", 110" or 120" TV.

Key information:

• High-quality processed, matt-black aluminium frame
• Very "slim display design" - only 12 mm frame visible all around
• 220 x 124 cm visible image area - 100"
• Fabric type: celexon CLR UST with 0.5 gain at 140° viewing angle - multi-layer PET fabric with light-reflective coating
• Fully 4k UHD capable, Active 3D capable
• Increases the in-picture contrast many times over compared to standard matt-white fabrics
• Specially optimised and only suitable for ultra-short throw projectors
• Waterproof - therefore wipeable with a damp cloth, anti-mould coating
• Permanently perfectly tensioned fabric, thanks to spring tensioning system on the rear side
• Simple, classic mounting of the frame (screwed L-angle plug-in system)
• Easy wall mounting, can be moved sideways at a later date
• Outer dimensions of frame: 223.9 x 126.9 cm
• REACH, ROHS, free of formaldehydes & toluene

Ambient and stray light are known problems of projection systems, as colors fade and blacks appear weakened. Consequently, the choice of the best place for the screen in the room is severely limited. Screens that have a special coating to prevent this effect are abbreviated ALR for "Ambient Light Rejecting".

This surface texture ensures a deeper black level, higher in-picture contrast, better color saturation and better picture brightness from the viewer position, regardless of whether ambient light is switched on or off or whether there is residual light (daylight) in the room.

The celexon HomeCinema CLR-ALR fabric is a special ALR fabric variant and does not reflect light from above back into the viewer's eye (unlike classic "Type D" (diffuse reflective) matt-white fabrics) and at the same time absorbs light coming from the side.

The projection light coming in from below is bundled & reflected centrally towards the viewer.

It is thus optimised exclusively and specifically for use with an ultra-short throw projector, achieving breath-taking projection results - even under residual light conditions.

If you are using an ultra-short throw projector, it is imperative that you use a projection surface that is flat and level to the maximum. Classical roll-up screens are usually not suitable for such a projection, as their screens hang freely in the room and may move slightly, or they may have minimal ripples in the screen fabric or at the edges, which is typical for roll-up screens.

A UST projection does not forgive any unevenness in the flatness, and distortions occur in the image due to the extremely wide projection angle - so that frame screens are the optimal type of screen for UST projectors thanks to the permanent fabric tension and thus perfect flatness.

The CLR HomeCinema UST frame screen fits perfectly into your existing room without standing out. Whether in a home cinema, conference or meeting room, this screen is a real eye-catcher and TV replacement, not only because of the special fabric or its high-quality finish, but also because of its slim design.

The fabric is stretched from behind onto the frame with the help of springs and is always perfectly flat. The frame is easy to assemble thanks to the simple plug-in system.

In the box you will find all mounting accessories as well as an easy-to-understand instruction manual.

• Projection type Front projection
• Format 16:9
• Viewing area (width) 221.5 cm
• Viewing area (height) 124.5 cm
• Black drop (top) 1.2
• Black border (left/right) 1.2
• Black border (bottom) 1.2
• Black back No
• Gain factor 0.5
• Mount Wall
• Color Black
• Product dimensions (width) 223.9 cm
• Product dimensions (height) 126.9 cm
• Product dimensions (depth) 3 cm
• Product weight (net) 15