Datavideo - PTR-10TMKII

The PTR-10T MARK II has the same features as the PTR-10 MARK II but with an HDBaseT interface. The usefulness of this model is especially evident in more complex installations, as with a single network cable the HDMI video signal is brought out of the camera, the power supply, the USB, the serial control cable and the net.

Video interface	HDMI x 1 SDI x 1 RJ45 x 1 (HDBaseT)
Video output	2160p 29.97/25 1080p 59.94/50 1080i 59.94/50 720p 59.94/50
Control unit	RMC-180 HS-1600T HS-1600T Mark II RMC-300A VISCA Protocol Controller IP Control IR remote
Panning / Tilting range	Pan: 340° Tilt: ±45°
Panning / Tilting speed	Pan: 0.2~15° / s Tilt: 0.1~10° / s
Preset	Pan/Tilt position 50
Control distance	1,200 m by RS422 100 m by DVIP
Control Protocal	Sony VISCA DVIP
Control input	RS-422 HDBaseT
Maximum load	4 kg max.
Control output	RS-232 RS-422 BX-Lens LanC
Power requirement	DC 12 V~ 18 V, 3 A (without camera) DC 12 V~ 18 V, 5 A (with camera)
Power supply	DC 12 / 10 / 8.4 / 7.4 V, 24 W max.
Operating temp. range	0~40 C°
Operating humidity range	10~80%
Storage temp. range	-10~60 C°
Storage humidity range	5~80%
Weight	3.4 kg
Dimensions (L x W x H)	230 x 190 x 300 mm
What's in the box	PTR-10T Mark II main unit x 1 DC 12 V power adaptor x 1 AC cord x 1 IR remote control x 1 DC with lock to D-Tap cable x 1 HDMI cable x 1 SDI cable x 1 Remote cable (2.5 mm phone-jack to mini-DIN 8 pin) x 1 1/4" screw (14 mm) x 2 1/4" screw (10 mm) x 1 1/4" to 3/8" screw adaptor x 1 PTR-10T Mark II Thank You Card x 1