MADRIX - NEBULA

MADRIX NEBULA is an easy-to-use and reliable Network node. It acts as an Art-Net Node interface / USB 2.0 DMX-512 Interface, SPI Converter for 12 Universes, 2 x OUT, for DIN rail mount. Developed and made in Germany, the MADRIX NEBULA directly connects to your LED pixels.

This advanced SPI decoder receives control data over USB or Art-Net over Ethernet network and is built to provide excellent image quality. Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.

Each device drives up to 2,048 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports. Art-Net is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. Simply use several units at the same time for larger projects.

MADRIX software and hardware allow you to fully synchronize Art-Net data for all ports and across multiple devices to get an optimal image on the LEDs without visual interruptions.

Designed for DIN rails or walls, its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off. The device is ready within seconds after startup.

HTP Merging is automatically available for two Art-Net sources. Its firmware is upgradable. Access and change specific device settings using the built-in web configuration page.

Technical characteristics

The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over USB or Art-Net over Ethernet network and is built to provide excellent image quality.

Direct connection 

Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.

Quality output of 12 universes 

Each device drives up to 2,048 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.

SPI converter 

Art-Net is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. Use USB or Art-Net for all the great features of the MADRIX software.

Sync mode

Simply use several units at the same time for larger projects. MADRIX Software and hardware allow you to fully synchronize Art-Net data for all ports and across multiple devices to get an optimal image on the LEDs without visual interruptions.

Designed for DIN rails or walls 

Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.

Invaluable features 

The device is ready within seconds after startup. HTP Merging is automatically available for two Art-Net sources. Its firmware is upgradable. Access and change specific device settings using the built-in web configuration page.

Supported LEDs 

APA101, APA102, APA104, APA106, FW1935, GS8206, GS8207, GS8208, GW6201, GW6205, LB1908, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883, SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822, SK9826, SM16703, SM16704, SM16716, TLC5973, TLS3001, TLS3008, TM1803, TM1804, TM1809, TM1812, TM1814, TM1829, TM1934, UCS512B3, UCS1903, UCS2603, UCS2903, UCS2904, UCS2904B, UCS5603, UCS5603A, UCS8903, UCS8904, UCS9812S, VS17822, WS2801, WS2803, WS2811, WS2811F, WS2811M, WS2811S, WS2812, WS2812B, WS2812C, WS2813, WS2814, WS2814F, WS2815, WS2818, WS2818M, WS2821, WS2821 Addressing, WS2822S, WS2822S Addressing

Connectivity

• 2 x OUT (via pluggable screw terminals)
• 2 x RJ45 Ethernet port
• 1 x USB port
• 1 x Power (via pluggable screw terminal)