Neutrik - NBB75SI

Isolated BNC cable jack for panel mount, solder version. Neutrik's BNC cable jacks for panel mount offer a true 75 ohm design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.

Features & Benefits

• Gold plated center contact
• True 75 ohm design meets the stringent HD requirements
• Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
• Grounded panel mount possible (remove isolation washer)

Product

• Title NBB75SI
• Connection Type BNC 75 ohm
• Gender F.

Electrical

• Signal Type HD, SDI, Video, AES/EBU, Composit, YUV, RGB, RGBH, RGBHV
• Contact resistance ≤ 3 m ohm (inner)
• Contact resistance ≤ 2 m ohm (outer)
• Dielectric strength 1,5 kV_DC
• Impedance 75 ohm
• Insulation resistance > 5 Gohm
• Rated voltage <50 V
• VSWR ≤1.050/>32 dB up to 1 GHz
• ≤1.065/>30 dB up to 2 GHz
• ≤1.100/>26 dB up to 3 GHz

Mechanical

• Insertion force < 25 N
• Lifetime > 1000 mating cycles
• Wiresize
• Wiring Solder contacts
• Locking device Bayonett
• Mounting direction Front mounting
• Chassis shape 12.7 mm

Material

• Contacts Brass (CuZn39Pb3), 0.2 µm AuCo (Center contact)
• Insert PTFE
• Shell Polyacetal (POM) (Insulation Sheell)
• Shell plating Optalloy®

Environmental

• Temperature range -30 °C to +85 °C