Neutrik - NBNC75BFG7X

The rearTWIST UHD BNC cable connector offers a true 75 ohm design and is perfectly suitable for UHD applications. The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding.

To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below.

Suitable cables:
Bryant BD SD01, CAE HD0628LSZH, Canford SDV, Cordial CVI 06-28, Cordial CVI 06-28HD, Cordial CVI 06-28HD-FRNC, Cordial CVI 3-7, Draka 0.6/2.8 AF, Draka 0.6 L/2.8 AF, Extron BNC-5RC, Fuzion SD-1, Klotz V06/28, Klotz VMXx75Y, Kabeltronik HFV 0.6/2.8 AF- FRNC, Kabeltronik MVP 5x 0.6/2.8 AF-FRNC, Nexans HF 75 0,6/2,9 02YS(ST)CH, Percon VK5, Sommer 600-0101M, Sommer 600-0104M, Tesca Supra

UHD optimized cables:
Argosy Image 360, Belden 1855ENH, Belden 1855ECH, Belden 1855EFN, Belden 1855DNH, Belden 70080, Belden 70080NH, Belden 70080CH, Canford SDV-X-LFH, DirectCable 301-351 Evolution XPC, DirectCable 360-031 Evolution XPC, DirectCable 360-036 Evolution XPC, Draka HD Pro 0.6/2.8 AF, Draka Ultra HD PRO 50 UHD, Klotz V062SH, Canare L-2.5CHWS

• Optimized contact pin and insulator design for UHD-data transmissions
• Proven rearTWIST technology
• Swiss antraloy plating
• Fully compatible with conventional BNC chassis connectors
• Improved return loss values at high frequencies
• Pin: 1.07 mm
• Shield: 5.00 mm

Electrical

• Contact resistance ≤ 3 m ohm (inner)
• Contact resistance ≤ 2 m ohm (outer)
• Dielectric strength 1.5 kV_DC
• Impedance 75 ohm
• Insulation resistance > 5 Gohm
• Rated voltage < 50 V
• VSWR ≤1.06 / >30 dB up to 6 GHz
• ≤1.13 / >24 dB up to 12 GHz
• ≤1.22 / >20 dB up to 18 GHz

Mechanical

• Cable O.D. 4.7 mm
• Cable retention > 30 N (center)
• Crimp size 5.0 Hex crimp (shield)
• Crimp size (pin) 1.07 crimp
• Insertion force < 25 N
• Lifetime > 1000 mating cycles
• Wiresize
• Locking device Bayonett
• Cable anchoring Jacket crimping

Material

• Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (center contact)
• Shell Brass (CuZn39Pb3)
• Shell plating Antraloy
• Insert PP

Environmental

• Temperature range -30 °C to +85 °C
• Contact crimpability Complies with IEC 60803 and IEC 60352-2