Neutrik - NC3FXXHA

Special version of the XLR cable connector XX Series with crimp terminals.

• Unique cage design of F. contact for low contact resistance and high integrity
• Crimp termination with standard B-crimp tool (B-crimp acc. IEC 60352-2)
• Gastight and Solderless connection (RoHS compliant)
• F. connector with improved solid metal latch which is larger and easier to handle
• Additional ground spring contacts for better shell ground continuity
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland gives high protection to cable bending stresses
• Colored rings and boots available for coding or identification
• Sleek and ergonomic design - valuable and handy
• Rugged zinc diecast shell, longlasting and dependable

Electrical

• Capacitance between contacts ≤ 4 pF
• Contact resistance ≤ 3 mohm
• Dielectric strength 1,5 kV_DC
• Insulation resistance > 10 Gohm (initial)
• Rated current per contact 1 A
• Rated voltage < 50 V

Mechanical

• Cable O.D. 3.5 - 8.0 mm
• Insertion force ≤ 20 N
• Withdrawal force ≤ 20 N
• Lifetime > 1000 mating cycles
• Wiresize 0.22 - 0.34 mm²
• Wiresize 24 - 22 AWG
• Wiring Crimp contacts
• Locking device Latch lock

Material

• Boot Polyurethan
• Contact plating 2 µm Ag
• Contacts Bronze (CuSn8)
• Insert Polyamide (PA66)
• Locking element Zinc diecast (ZnAl4Cu1) / Ck 67 (spring)
• Shell Zinc diecast (ZnAl4Cu1)
• Shell plating Nickel
• Strain relief Polyacetal (POM)

Environmental

• Flammability UL 94 V-0
• Standard compliance IEC 61076-2-103
• Protection class IP 40
• Solderability Complies with IEC 68-2-20
• Temperature range -30 °C to +80 °C