Neutrik - NC3MAAH-0

Chassis mount XLR 3 pole male connector, ground contact connected to housing ground, but not to front panel and pin 1, horizontal PCB mounting. Cheaper round plastic body. Front panel cutout and PCB layout 100% compatible with A-series. "Tulip" type contact design with high contact pressure for maximum life. UL94HB flame retardant certified. UL recognized component. Gold plated contacts.

• Most cost-effective series
• "Tulip" type contact design with high contact pressure for highest durability
• Selective gold plated contact and PCB termination area for best conductivity and solderability

Electrical

• Capacitance between contacts ≤ 4 pF
• Contact resistance ≤ 6 mohm
• Dielectric strength 1.5 kV_DC
• Insulation resistance > 10 Gohm (initial)
• Rated current per contact 6 A
• Rated voltage < 50 V
• Grounding Options Ground contact connected to shell ground, but not to chassis and Pin 1

Mechanical

• Insertion force ≤ 20 N
• Withdrawal force ≤ 20 N
• Lifetime > 1000 mating cycles
• Locking force > 20 separating force N
• Wiresize
• Wiring Horizontal PCB mount
• Locking device Latch lock
• Mounting direction Rear mounting
• Chassis shape A
• Mounting A-Screw

Material

• Contacts brass (CuZn35Pb2)
• Shell Polyamide (PA 6.6 30 % GR)

Environmental

• Approvals UL
• Flammability UL 94 HB
• Standard compliance IEC 61076-2-103
• Protection class IP 40
• Solderability complies with IEC 68-2-20
• Temperature range -30° C to +80° C