Neutrik - NE8MX6

The set NE8MX6 consists of a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6A compliant RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and wire gauge of AWG24/1 - AWG22/1 (solid) or AWG24/7 - AWG22/7 (stranded).

Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.

If the insulation diameter is ≤ 1.1 mm please refer to NE8MX6-T.

• Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
• PoE++ compliant according to 802.3bt Type4
• IP65 protected when mated with NE8FDX-P6- W or NE8FDX-Y6- W
• Rugged latch lock system million fold proven
• Intermateable with the existing etherCON CAT5 range
• Unique Neutrik chuck-type strain relief

Electrical

• Dielectric strength 1 kV_DC
• Insulation resistance > 0.5 Gohm
• Rated current per contact 1.5 A
• Transmission performance CAT6 A, acc. TIA/EIA rating
• CAT6 A, acc. IEC/ISO/EN rating
• Power over Ethernet PoE++ acc. IEEE 802.3bt

Mechanical

• Cable O.D. 7.0 - 9.5 mm
• Lifetime > 1000 mating cycles
• Wiresize AWG 24/1 - AWG 22/1 (solid)
• AWG 24/7 - AWG 22/7 (stranded)
• Locking device Latch lock
• Insulation diameter 1.1 - 1.6 mm

Material

• Bushing PA / PU
• Contact plating Au
• Shell Zinc diecast (ZnAl4Cu1)
• Shell plating Nickel
• Strain relief POM

Environmental

• Protection class IP 65 (in combination with NE8FDX-*6-W)
• Temperature range -40 °C to +70 °C