SKU: HSTDIOCARD

NovaStar - H STD IO Card

I/O card - 2 x RS232 / RS485 / RS422 ports - 1 x Ethernet - 3 x I/O - 3 x relay out

(0)

402.00 £

- 42%

231.50 £

Pay in 4 interest-free payments of 57.88 £ with Discover More

Unfortunately, the quantity you have selected exceeds the amount available in stock. No problem! We will go ahead and send you the available quantity. We will then send you the reminder approximately within ten days.

Unfortunately, the quantity you have selected exceeds the amount available in stock.

Condition: New

I accept the general conditions and the privacy policy.

Not available.

delivery is not available for this product.

Free shipping for orders over € 199 (within Europe)

Variants of this product

NovaStar - H_4×OPT sending card

2,557.00 £

(0)

Output card for H15 and H20: 4 x 10G OPT. Supports SFP single-mode and multi-mode

NovaStar - H_16xRJ45+2xFiber

1,017.50 £

(0)

16x RJ45 + 2x Fiber output card for Novastar H Series H2/H5/H9/H15 video wall splicers

NovaStar - H_2xRJ45+1xHDMI1.3

769.00 £

(0)

2x RJ45 + 1x HDMI 1.3 preview card for Novastar H Series H2/H5/H9/H15 video wall splicers

NovaStar - H 4xfiber sending card

1,889.00 £

(0)

Sending Card for the H-Series controllers, 20.8 Mpixels, single and multimode SFP modules supported

NovaStar - H_2xAudio Input+2xAudio output

641.50 £

(0)

2 x audio input + 2 x audio output card

Product Details

I/O board with 2 RS232 / RS485 / RS422 ports, 1 x Ethernet, 3 x I/O and 3 x relay outputs. This card can be installed in input card slots.

Main features

2 x COM
- Programmable RS422/RS485/RS232 ports that are used to control the devices that adopt RS422/RS485/RS232 protocol
1 x Ethernet
- Control the device connected to this card
- 10/100Mbps self-adaptive
- TCP/IP protocol and UDP/IP protocol supported
3 x I/O
- Trigger the execution of the function requirements via programming
- Input and output modes supported
- Pins 1, 2 and 3 can be set to either the input or output, and pin G is the common grounding pin for pins 1, 2 and 3
3 x relay outputs
- Connect to the relay to control the power on and off the connected device
- Voltage: 30 VDC, current: 3A at maximum
- Six pins are divided into three groups, which can be connected or disconnected via programming
3 x IR outputs
- Programmable infrared control supported
- Pins 1, 2 and 3 are used for infrared emission, and pin G is the common grounding pin for pins 1, 2 and 3

Power consumption: 1.2 W
Dimensions: 193 × 247.12 × 21.15 mm
Weight: 400 g

More.. Show less