H_4×OPT sending card
search
H_4×OPT sending card
search
H_4×OPT sending card

SKU: H4XOPTOUT

NovaStar

NovaStar - H_4×OPT sending card

Output card for H15 and H20: 4 x 10G OPT. Supports SFP single-mode and multi-mode
star_border star_border star_border star_border star_border
(0)
5,388.00 €
- 46%

2,890.50 €

Unfortunately, the quantity you have selected exceeds the amount available in stock. No problem! We will go ahead and send you the available quantity. We will then send you the reminder approximately within ten days.
Unfortunately, the quantity you have selected exceeds the amount available in stock.
Condition: New

Not available.

delivery is not available for this product.

Free shipping for orders over € 199 (within Europe)

Variants of this product

NovaStar - H_2xRJ45+1xHDMI1.3

1,093.50 €

2x RJ45 + 1x HDMI 1.3 preview card for Novastar H Series H2/H5/H9/H15 video wall splicers
NovaStar - H STD IO Card

262.00 €

I/O card - 2 x RS232 / RS485 / RS422 ports - 1 x Ethernet - 3 x I/O - 3 x relay out
NovaStar - H_2xAudio Input+2xAudio output

725.00 €

2 x audio input + 2 x audio output card
NovaStar - H_16xRJ45+2xFiber

1,430.50 €

16x RJ45 + 2x Fiber output card for Novastar H Series H2/H5/H9/H15 video wall splicers
NovaStar - H 4xfiber sending card

2,652.00 €

Sending Card for the H-Series controllers, 20.8 Mpixels, single and multimode SFP modules supported

Product Details

Output card for Video wall splicer H15 and H20 with 4 OPT 10G optical ports. It can load up to 20,800,000 pixels (maximum width 16,384 pixels, maximum height 16,384 pixels). Single and multiple SFP modes.

Both SM (single-mode) and MM (multi-mode) optical modules are supported, with a transmission distance of up to 10 km, 8-bit and 10-bit outputs. SFP+ encapsulation for the optical module.

Supported module specifications include the following:

10G SFP+ SR optical module
10G SFP+ LR optical module

Technical characteristics

  • Independent, copy and backup modes are supported
  • Independent: 4 OPT ports are all used for output and have the same loading capacity. The loading capacity of one port is equal to that of 8 Ethernet H20 Video vall splicer Specifications www.novastar.tech 17 ports
  • Copy: OPT 1 and OPT 2 are used for main output. OPT 3 copies the output on OPT 1, while OPT 4 copies the output on OPT 2
  • Backup: OPT 1 and OPT 2 are used for main output. OPT 3 serves as the backup of OPT 1, while OPT 4 serves as the backup of OPT 2.
  • Power consumption: 39 W
  • Dimensions: 193 × 247.12 × 21.15 mm
  • Weight: 500 g
  • Notes:
    • Four 10G SFP+ LR optical modules are included with the card and are already installed into the OPT ports
    • When the screen is loaded by the H_4xfiber sending card, the preset transition effect supports cut only
    • When the screen is loaded by the H_4xfiber sending card, NovaLCT V5.4.4.6.CRM7401 is required for screen configurations
More.. Show less
Product already in wishlist
Product added to wishlist