NovaStar - H_4xHDBaseT output card

Video output card for Novastar H series video splicers with 4 x RJ45 Gigabit Ethernet ports. Support for single link and dual link output modes and accompanied audio. This card does not support fade transition effect.

Technical characteristics

• Single link output:
  • 
    
  • Four connectors are all available for output
  • Each connector supports the maximum resolution of 2048× 1152 @ 60 Hz
  • Custom resolution: max. width 2560 pixels (2560×983 @ 60 Hz), max. height 2560 pixels (884×2560 @ 60 Hz)
  • Supports 8-bit RGB 4:4:4/YCbCr 4:4:4/YCbCr 4:2:2 output
  • Supports 10-bit YCbCr4:4:4 output
  
  
• Dual link input:
  • 
    
  • Connector 2 and 4 are available for output. Connector 1 copies the output on connector 2, and connector 3 copies the output on connector 4
  • Each connector supports the maximum resolution of 4096× 2160 @ 30 Hz / 3840×1080 @ 60 Hz
  • Custom resolution: max. width 4096 pixels (4096×1130 @ 60 Hz), max. height 4096 pixels (1014×4096 @ 60 Hz)
  • Supports 8-bit RGB 4:4:4/YCbCr 4:4:4/YCbCr 4:2:2 output
  • Supports 10-bit YCbCr4:4:4 output

• 
  
• Status LEDs:
  • 
    
  • Green (ON), yellow (flashing): the backend device is connected via the Ethernet cable
  • Green (OFF), yellow (OFF): the backend device or Ethernet cable is not connected
  
  
• Power consumption: 32 W
• Dimensions: 193 × 247.12 × 21.15 mm
• Weight: 500 g