NovaStar - H_STD I/O card

Name: H_STD I/O card
Brand: NovaStar
SKU: M04020107
Price: 351.5 EUR
Availability: OutOfStock

STD I/O card with RS232 / RS485 ports, Ethernet connectivity, I/O triggers, relay outputs for LED displays, use with NovaStar's H series

(0)

525.00 €

- 33%

351.50 €

Pay in 4 interest-free payments of 87.88 € with Discover More

Unfortunately, the quantity you have selected exceeds the amount available in stock. No problem! We will go ahead and send you the available quantity. We will then send you the reminder approximately within ten days.

Unfortunately, the quantity you have selected exceeds the amount available in stock.

Condition: New

I accept the general conditions and the privacy policy.

Not available.

delivery is not available for this product.

Free Shipping for order equal or above € 199 are limited for delivery within Europe

Variants of this product

NovaStar - H_2×Audio In+2×Audio Out Output Card

896.00 €

(0)

2 x audio input + 2 x audio output card, 48 kHz sampling, single / dual channels, advanced output options, use with NovaStar's H Series

NovaStar - H_2xRJ45IP

1,288.00 €

(0)

2x RJ45 IP input card for Novastar H Series H2/H5/H9/H15 video wall splicers

RGBlink - Input Option 980-0001-01-1

90.50 €

(0)

EXT Input Interface Card - Required for interfacing input options to X1/X1pro/X1Pro E

Product Details

STD I/O card with RS232 / RS485 ports, Ethernet connectivity, I/O triggers, and relay outputs for LED displays. For use with the NovaStar H series.

Main features

2 x COM:
- Programmable RS422 / RS485 / RS232 ports used to control devices that use the RS422 / RS485 / RS232 protocol
- The COM port pinouts are shown below:

- The pinout is shown below:

1 x Ethernet:
- Controls the device connected to this board
- 10/100 Mbps self-adaptive
- Supports TCP/IP and UDP/IP protocols
3 x I/O:
- Triggers the execution of required functions via programming
- Input and output modes supported
- Pins 1, 2, and 3 can be set as input or output, and pin G is the common ground pin for pins 1, 2, and 3
3 x relay outputs:
- Connect to the relay to control the connected device's ON/OFF
- Voltage: 30 V_DC, current: 3A max.
- 6 pins are divided into 3 groups, which can be connected or disconnected via programming
3 x IR OUT:
- Programmable infrared control supported
- Pins 1, 2, and 3 are used for infrared emission, and pin G is the common ground pin for pins 1, 2, and 3