Light dimmer connection cable for DMX 512/1990 communication protocol. Ideal for both mobile and fixed installation. Resistant to trampling. Conductor: two tinned copper conductors, white and red, each consisting of 7 capillaries with a cross-section of 0.20 mm each, insulated with PEE (polyurethane foam), diameter 1.50 mm (± 0.05 mm), 1st Shielding: Duplex Al/PET foil, 100% coverage, 2nd Shielding: tinned copper braid, 80% coverage, Outer sheath: PVC 64 SH, matt black, outer diameter 5.20 mm (± 0.10 mm). Not to be used in electrical installations. Available in 100 m skeins.

Standards

• Inner Conductor Tinned Copper, Stranded

• Dielectric Polyethylene Foam

• Filler Anti-crushing cotton

• Aluminium / PET foil

• Drain Wire

  • Tinned Copper, Stranded

  • Tinned Copper, Braid

• Jacket Special PVC TM2 (YM2) 60 Shore EN 50363-4-1

• Fire behaviour IEC 60332-1-2

 

Technical Data

• Impedance Ohm 120,0

• Inner Conductor Resistance  Ohm / km 91,0

• Peak Operating Voltage Volt 49 Vac / 110 Vdc

• Nominal Voltage Uo/U Volt 300/300

• Test Voltage Volt 2.000

• Insulation Resistance MOhm / km > 20

• Temperature Range Fixed Installation - 15 °C / + 70 °C

• Min. Bending Radius Fixed Installation 10 x Diameter

   

   

   

Construction

Inner Conductor   Cores (mm2) Construction (Nr / mm) Color Diameter (mm)	2 x 0,22 7 x 0,20 White - Red 1,50
Jacket Color Diameter (mm)	Black 5,20
Weight (kg / km)	33,0