RGBlink - MSP 315-4 (TX/RX Set)

The MSP315-4 HDBaseT extender is a TX/RX kit that allows you to easily extend HDMI signals (with HDCP 2.2 compliance) using a CAT5e / CAT6a cable. 1080p signals can be transmitted up to 70 m, while 2160 @ 30fps (2K) resolution signal can be transmitted up to 40 m. PoE (Power over Ethernet) is available to remotely power the unit from one end, eliminating the need for an extra power supply. IR transmission and bi-directional RS232 are also present to support a wide range of use cases. MSP315-4 is supplied as a ready to use transmitter (TX) and receiver (RX) set.

• Extend HDMI 2K signals to 70m or 4K signals up to 40m via CAT-5e or CAT-6a 
• Resolutions up to 2160p @ 30 Hz
• Support for HDMI 1.4 signals
• HDCP 2.2 compliant
• Power from one end using PoE  
• IR and RS232 bi-directional communication

​Connectors

• Input
  • TX  HDMI 1.4 1×HDMI Type A 
  • RX  HDBaseT 1×RJ45
• Output
  • ​TX   HDBaseT 1×RJ45
  • RX HDMI 1.4 1×HDMI Type A
• Communication 
  • TX
  • RS232 1×Euroblock (3-pin phonex connector)
  • IR (IN |  Out) 2×3.5 mm Phone Jack
  • RX 
  • RS232 1×Euroblock (3-pin phonex connector)
  • IR  (IN |  Out) 2× 3.5 mm Phone Jack

Performance

• Input Resolutions
  • SMPTE 720p @ 23.98/24/25/29.97/30/50/59.94/60  |  1080i @ 23.98/24/25/29.97/30/50/59.94/60  |  1080p @ 23.98/24/25/29.97/30/50/59.94/60  | 2160p @ 30
  • VESA 800x600 @ 60  |  1024x768 @ 60  |  1280x768 @ 60  |  1280x1024 @ 60  |  1366x768 @ 60  |  1600x1200 @ 60 |  1920 x 1080 @ 60  |  2048x1152 @ 60  |  2560x1600 @ 60  |  3840x1080 @ 60  |  3840x2160 @ 30
• Output Resolutions
  • SMPTE 720p @ 23.98/24/25/29.97/30/50/59.94/60  |  1080i @ 23.98/24/25/29.97/30/50/59.94/60  |  1080p @ 23.98/24/25/29.97/30/50/59.94/60  | 2160p @ 30
  • VESA 800x600 @ 60  |  1024x768 @ 60  |  1280x768 @ 60  |  1280x1024 @ 60  |  1366x768 @ 60  |  1600x1200 @ 60  |  1920 x 1080 @ 60  |  2048x1152 @ 60  |  2560x1600 @ 60  |  3840x1080 @ 60  |  3840x2160 @ 30
• PoE Max 125 mA 
• Supported Standard HDMI 1.4 / HDBaseT 1.0