Rondson - AM 120 IP-2

120 W_RMS integrated amplifier / mixer equipped with an IP network adapter. It works on 70 and 100 V distributed line as well as 4 - 16 ohm in low impedance. The main supply is 230 V_AC and it works exclusively with the IP AM IP SOFTWARE software.

Main features

• High quality TCP/IP digital audio transmission, without interference
• LCD display, all functions can be activated with a single button
• Free digital audio control, multi-function combination and partition, local broadcast function
• Built-in alarm cut-off function, no forced cut-off 24 V, not limited to the amount of volume settings, 3-line connection
• Power management: when there is no music or calls the unit goes into standby mode automatically
• Standby consumption is less than 3%, which corresponds to energy saving standards
• Each MIC, AUX and network source has an individual volume control
• Line out for extension
• 6 output level indicators
• Progressive fan cooling function

Technical characteristics

Output power	120 WRMS
Power supply	230 VAC
Speaker outputs	70 et 100 V , 4 - 16 ohm
Internet socket	RJ45
Transmission speed	10 Mbps
Support	TCP/IP, UDP, IGMP (group broadcast)
Sound format	MP3 / MP2
Sound quality	16-bit stereo CD quality
Sampling frequencies	8 - 48 kHz
Capacity	8 - 512 kbps
Inputs / sensitivity	MIC: 5 mV AUX: 350 mV
Frequency response	60 - 18,000 Hz (±3 dB)
S/N ratio	≥ 65 dB
Consumption	180 W
Total harmonic distortion	<0.1%
Protection and cooling	fan, thermal protection, overload and short-circuit
Dimensions (W x D x H)	484 x 303 x 88 mm - 19" 2U
Weight	11 kg