TARM Lasers - tarm 25 FB4 IP65

tarm 25 FB4 IP65 is a compact high-end show laser made in Germany, ideal for the best professional laser show applications of all kinds.

It is built with the latest RTI semiconductor laser modules, which are specially designed to keep the spot size and divergence the same on both the x and y axis. This offers significant advantages over solutions with very good divergence on one axis, but poor divergence on the other. The laser modules inside the tarm 25 FB4 IP65 are different: the spot size and shape are the same for all colors and on both axes!

The beam specifications of the new tarm 25 FB4 IP65 are characterized by a diameter of only approx. 5 mm and a divergence < 0.8 mrad, which applies to both axes. The extremely small beam diameter allows the use of very small mirrors, 4.5 mm, which results in low inertia and therefore very good scanning performance. This is especially important, as the tarm 25 FB4 IP65 can be used for any type of laser show application: super sharp beams and vivid colors for large-scale concerts and festivals, but also a perfectly matched beam for sharp graphics.

This laser impresses with a guaranteed RGB output power of 25,000 mW. Excellent visibility is achieved with the new RTI semiconductor laser modules (RSL) with special wavelengths for increased visibility: 8000 mW / 637 nm for a very bright red combined with 12,000 mW / 525 nm green and a powerful blue laser module with 10,000 mW / 455 nm. The 525 nm green provides a warmer shade of green than the 520 nm diodes and has a higher visibility.

These new RSL modules, with their extremely low divergence and homogeneous beam shape, make the tarm 25 FB4 IP65 a professional laser system of the highest level. In addition, they are maintenance-free and do not lose internal alignment.

Standard scanners can operate at a maximum of 45 kpps at 8° with a maximum scan angle of 50°. CT-6210H scanners with LAS Turboscan drivers are available as an option and provide even higher scan speeds of up to 60 kpps at 8° ILDA.

A Pangolin FB4 interface, here installed instead of the Shownet interface, enables control of the laser with Pangolin software.

The powerful tarm 25 FB4 IP65 is suitable for indoor and outdoor laser show applications at concerts, festivals and other large events. Demanding graphic projections or projections over long distances are possible without any problems, thanks to the very good divergence.

Key Features

• 25 W total RGB power in a small housing of only 44.1 x 26 x 15.3 cm
• Super small spot of approx. 5 mm for low inertia and therefore fast scanning
• All wavelengths matched in divergence and beam size
• Brilliant colors and great color fade
• Different, brighter wavelengths for greater visibility
• Very good scanning performance suitable for both projections and beams
• Extremely low divergence < 0.8 mrad on both axes!
• Compact form factor, module dimensions equal to Coherent OPSL modules
• Weight of only 18.3 kg
• Laser modules do not move out of internal alignment
• Maintenance-free laser modules
• Integrated network switch for control signal connection
• High-quality product, Made in Germany

User benefits

• Guaranteed high output power of 25,000 mW
• Capable of handling complex graphics
• Intense beams that are extremely sharp, especially when compared to other lasers of this power
• Powerful integrated motherboard with advanced configuration features and DAC
• Robust compact housing
• Waterproof flight case included
• Pangolin FB4 interface

Areas of use

• Indoor and outdoor laser shows at concerts, festivals and other large events

Technical characteristics

• Guaranteed power at aperture: 25,000 mW
• Power red: 8000 mW / 637 nm
• Power green: 12,000 mW / 525 nm
• Power blue: 10,000 mW / 455 nm
• Beam specifications: ca. 5.0 mm / < 0.8 mrad
• Scanner: 45 kpps @ 8° ILDA; optional CT-6210H with LAS Turboscan: 60 kpps @ 8° ILDA, max. 60°
• Max. scan angle: 50°
• Laser source: RSL modules
• Laser Class: 4
• Pangolin FB4 interface
• Operation modes: ILDA, DMX, LAN, Art-Net, integrated SD card, stand-alone, Master/Slave
• Basic patterns: available for download
• Power supply: 85 - 250 V_AC 50/60 Hz
• Power consumption: 450 W
• Dimensions: 44.1 x 26 x 15.3 cm
• Weight: 18.3 kg
• What's in the box: 
  • tarm 25 FB4 IP65
  • Waterproof flight case
  • Power cable
  • Manual
  • Interlock connector, key