TARM Lasers - tarm 3

Tarm 3 is a white light RGB laser with fully analog color modulation and pure diode light source. The guaranteed output power is 3000 mW after the optics. This laser has a built-in network DAC for Showcontroller and Showeditor, but can also be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). It also has built-in memory with preset patterns, which can be easily triggered via DMX and auto mode.

Tarm 3 comes with an integrated ShowNET network interface and free laser show software (Showeditor). Showcontroller software is also supported and can be purchased additionally. Two different DMX modes are available:

• DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system
• Professional mode with full DMX functionality, especially for users with a DMX console. All adjustments can be activated and allow full control of the professional laser show.

The integrated ShowNET works as a DAC and allows for ILDA streaming.
The maximum scan speed is very high, equal to 45 kpps @ 8° ILDA for graphic projection and allows a maximum scan angle of 50°; optionally it is possible to have a scanner CT-6210 with 60 kpps @ 8° ILDA and max. scan angle of 60°. High-precision diode arrays provide excellent beam divergence of less than 0.6 mrad for a small beam diameter.

This laser is able to deliver beautiful colors, with good color fading. It impresses with its very bright 1 W and 637 nm single mode red. We then have a 900 mW green at 520 nm and a 1700 mW blue at 450 nm.

The tarm 3's housing is built in a very robust and dust-resistant way, so there is no air circulation inside the case: this keeps maintenance to a minimum. The mounting bracket allows the laser system to be hung and vertically mounted.

Tarm 3 is particularly suitable for show laser applications in clubs and bars and can be used by both beginners and professionals.

Technical characteristics

• Guaranteed power at aperture: 3000 mW
• Power red: 1000 mW / 637 nm
• Power green: 900 mW / 520 nm
• Power blue: 1700 mW / 450 nm
• Scanner: CT-6210H with LAS Turboscan: 60 kpps @ 8° ILDA, max. 60°
• Max. scan angle: 50°
• Laser source: diode
• Laser class: 4
• Operation modes: ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, Master/Slave
• Basic patterns: over 120 (layers, tunnels, fences, waves, etc.)
• Accessories: incl. outdoor case, power cable, manual, key, interlock connector, full version Showeditor software license included
• Power supply: 85 - 250 V_AC 50/60 Hz
• Power consumption: 170 W
• Dimensions: 320 x 260 x 140 mm
• Weight: 12.5 kg