Audiophony PA - Aio4125

The Aio4125 is an all-in-one 4 × 4 amplified matrix system designed for multi-zone installations. In a compact 1U half-rack format, it integrates a mixer, intelligent matrix routing, advanced DSP, and high-quality amplification. Pascal UMAC amplifier technology ensures high performance with 4 × 125 W @ 4 ohms or 2 × 250 W in bridge mode/100 V, maintaining extremely low harmonic distortion (THD+N < 0.05%) even under demanding conditions.

The DSP operates on three levels—input, zone, and output—allowing for parametric equalization, compression, filters, delay, and phase correction, with lockable presets to protect the system from tampering and ensure consistent performance over time.

Configuration is via an HTML5 interface accessible from any browser, without dedicated software, with routing, priority, custom mix, and zone limitations. Comprehensive connectivity: balanced/unbalanced inputs, S/PDIF, GPIO, Wi-Fi, and Ethernet, with compatibility with AioCTL wall controllers from the same brand for simple and intuitive control by users and staff.

User benefits

• Easy multi-zone management thanks to 4 × 4 routing with intuitive controls via HTML5 interface
• Three-level DSP with lockable presets
• Reduced installation time thanks to browser-based configuration without dedicated software
• Compatibility with AioCTL wall controllers
• High reliability thanks to Pascal UMAC amplifier modules
• Balanced inputs, S/PDIF, GPIO, Wi-Fi, and Ethernet

Areas of use

• Restaurants, lounges, and venues with multiple sound environments
• Hotels, reception areas, meeting rooms, and hospitality spaces
• Shops, showrooms, and multi-zone commercial spaces
• Terraces, outdoor areas, and distributed environments

Technical characteristics

• Amplification: 4 × 125 W @ 4 ohm / 2 × 250 W @ 100 V / 2 × 250 W @ 8 ohm (bridge)
• Modules: Pascal UMAC Class-D
• THD+N: < 0.05% (20 Hz – 20 kHz)
• Signal-to-noise ratio: > 106 dB
• Inputs: 4 analog (balanced Euroblock + unbalanced RCA), adjustable sensitivity (MIC / -10 dBu / +4 dBu / +14 dBu)
• S/PDIF: 1 × input / 1 × output
• DSP: triple level (input / zone / output), 5 and 10-band parametric EQ, crossover, FIR 512 taps, compression, limiters
• Control: HTML5 web interface, Wi-Fi + Ethernet, AioCTL compatible, 8-pin GPIO
• Format: 19″ rack, 1U half-width
• Power: 100 – 240 V_AC
• Power consumption: max. 700 W 
• Included accessories: 2 mounting brackets, 1 x ½-rack extension - AioR1, power cable, 2 half-rack mounting plates - AioR1, 2 rear brackets - AioR2, Euroblock connectors, rubber feet, documentation
• Dimensions: 22 × 4.45 × 31.9 cm
• Weight: 2.8 kg