Beetek - M1-110GH

HDMI Fiber Extender is a transmitter / receiver kit designed especially for the rental and event, show and presentation industry, taking into account various parameters.

The device can support a resolution of up to 4K @ 60 4:4:4 at a transmission rate of 18 Gbps. It uses single-core multi-mode OM3 fiber technology and can work up to a distance of 500 m. The device supports 40 dB input balancing at the transmitter to compensate for the loss generated by the cable from the source to the transmitter itself.

EDID simulation is built-in, as is EDID learning support.

The extender can transmit video without any perceptible delay and reconstruct the signal precisely, maintaining pixel integrity, so that every pixel of the original video is reproduced correctly on the target screen. The video signal is also transmitted without compression, thus maintaining the original quality.

The device is carefully designed, employing a dustproof protective cover for the fiber interface.

Technical characteristics

• One core multi-mode HDMI 2.0 fiber expander    
• Signal: HDMI 2.0    
• Input connectors:   
  • TX: F. HDMI Type A connector
  • RX: single-core LC    
• Output connector:
  • TX: single-core LC
  • RX: M. HDMI Type A connector        
• Fiber interface dust prevention: yes    
• Fiber type: multi-mode OM3    
• Indicator LED: signal, power, EDID 3-way indicator        
• USB power: yes
• Power from connector (TX): yes    
• Locking power connector: yes    
• EDID switch (TX): learn button and mode button    
• EDID modes: transparent, learn and internal    
• DDC: yes    
• HDMI audio: yes
• 3D: yes
• CEC: supports in EDID pass-through mode    
• ARC: supports in EDID pass-through mode    
• HDCP: supports in EDID pass-through mode   
• XvYCC color space: yes
• Optical module: 4 x 8G, 2 x 2.5G multi-mode optical module
• Technical characteristics: circuit-multiplexing SerDes technology  
• Fiber module life: 100,000 hours  
• Resolution: 3840 x 2160 @ 60 Hz
• Transmission distance: multi-mode OM3 500 m    
• Clock bandwidth: 3 x 600 MHz
• Transmission speed: 18 Gbps
• Balancing chip: automatic equalization  
• Reclocking: yes    
• ESD protection: yes    
• Hot plug: yes    
• Delay: zero-frame    
• Compression: none    
• Sampling rate: bandwidth range 8 - 16 bit    
• Sampling ratio: RGB 4:4:4 , YUV 4:4:4, YUV 4:2:2, YUV 4:2:0
• Power supply: 5 V_DC 1.0 A   
• Ambient temp.: -20 to 70 °C    
• Material: zinc alloy mold    
• Dimensions (TX/RX): 90 x 37.5 x 15 mm
• Package dimensions: 212 x 201 x 62 mm      
• Weight: TX 120 g, RX 118 g    
• Package weight: 0.54 kg