Beetek - STH905-2.5M

USB Type-C to HDMI 2.0 adapter cable, 2.5 meters long; offers a transmission speed of up to 18 Gbps to connect devices with USB Type-C output to displays or projectors with HDMI input. Supports resolutions up to 3840 x 2160 @ 60 Hz with 4:4:4 color sampling.

Designed according to the USB 3.1 standard, this cable incorporates active conversion technology, with a built-in 15 kV anti-static chip, ensuring optimal protection against interference and electrostatic damage.

Technical characteristics

• Signal type: USB 3.1 to HDMI 2.0
• Conversion method: active
• Input connector type: USB Type-C
• Output connector type: HDMI Type A
• Environmental info: RoHS 2.0 compliant
• Connector gold plating: shell 3 μm; pins 15 μm
• Connector dimensions: HDMI: 67.4 x 20.8 x 20.3 mm; Type-C: 39.7 x 13.5 x 7 mm
• Connector structure (Type-C): plug plate + inner mold + copper foil + shell
• Connector structure (HDMI): active PCB board + SR outer mold + shell + screw + protective cap
• Internal mold (Type-C): transparent PE material
• Copper foil (Type-C): double-sided conductive copper foil
• SR outer mold (HDMI): black injection mold
• Locking connector (HDMI): stainless steel screw
• Shell:
  • Type-C: injection-molded shell (UL, RoHS)
  • HDMI: zinc alloy upper and lower assembled shell
• Protective cap: detachable cap with cord leash
• Components: conductor + copper foil + Mylar + braid + jacket
• Conductor material: stranded tinned copper
• Conductor diameter: 30AWG
• Braid material: 16 x 10 braided copper wire
• Shielding rate: 7 mesh, 85% shielding rate
• Jacket material: silicone
• Cable diameter: 5.0 mm
• Cable color: black
• Cable meter marking: waterproof text
• EDID: yes
• DDC: yes
• HDMI audio: yes
• 3D: yes
• CEC: yes
• ARC: yes
• HDCP: yes
• HDR: yes
• XvYCC color space: yes
• ESD: yes
• Supported resolutions: 3840 x 2160 @ 60 Hz
• Clock bandwidth: 600 MHz x 3
• Transmission rate: 18 Gbps
• Plug & Play: yes
• Delay: zero
• Compression: none
• Deep color: yes
• Color sampling rate: RGB 4:4:4, YUV 4:4:4, YUV 4:2:2, YUV 4:2:0
• Electrical test (voltage): 300 V_DC
• Impedance test (insulation): ≥ 10 Mohm
• Impedance test (continuity): ≤ 22 ohm
• Tensile strength: ≤ 200 N
• Maximum bending angle: 135°
• Operating temperature: -40 to 80 ℃