Blackmagic Design - Blackmagic 2110 IP Converter 3x3G

Convert three 3G-SDI devices into 2110 IP video systems thanks to the 10G Ethernet connection capable of managing 3 video channels simultaneously. All 3 channels can be sent via a simple 10G RJ45 Ethernet connection, so you can use common cheap CAT6 Ethernet cables. Each channel is equipped with independent SDI inputs and outputs, allowing you to connect 6 different SDI devices.

All 3G-SDI inputs have loop outputs allowing the converter to be installed in existing SDI systems. The reference output is synchronized to the PTP 2110 clock.

For monitoring, settings and diagnostics there is a color LCD display on the elegant front panel, from which you can even route IP inputs.

Technical characteristics

Connections

• SDI inputs: 3
• SDI loop outputs: 3
• SDI outputs: 3
• SDI audio inputs: 16 channels embedded audio
• SMPTE 2110 input / output: 10G Ethernet supports 3 x video input channels and 3 x video output channels each up to 1080p 60 and up to 16 channels of embedded audio plus ancillary data
• 10G Ethernet Port: 1 x 10 Gb/s PoE+ RJ45 connector supports 10/100/1000/10G BASE-T.
• Reference output: Tri-Sync or Black Burst
• Computer interface: USB-C for updates, configuration and control

Video standards

• SD video standards: 525i 59.94 NTSC, 625i 50 PAL 
• HD video standards: 720p 50, 720p 59.94, 720p 60; 1080i 50, 1080i 59.94, 1080i 60; 1080p 23.98, 1080p 24, 1080p 25, 1080p 29.97, 1080p 30, 1080p 50, 1080p 59, 1080p 59.94, 1080p 60
• SDI compliance: SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and level B, ITU-R BT.656, ITU-R BT.601
• SDI metadata support: RP 188/SMPTE 12M-2 and closed captioning
• Audio sampling: television standard sample rate of 48 kHz and 24 bit
• Color precision: 8, 10 RGB 4:4:4 in all modes up to 1080p 30 and 8, 10-bit YUV 4:2:2 in all modes
• Color space: REC 601, REC 709

IP video compliance

• SMPTE 2110-20 (uncompressed video): IGMP v2
• SMPTE 2110-21 (traffic shaping):
  • Sender: narrow
  • Receiver: narrow, wide synchronous, asynchronous
• SMPTE 2110-30 (PCM): audio conformance level C
• SMPTE 2110-40 (ancillary data): full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadata
• Codec: Blackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP video
• PTP (Precision Time Protocol): IEEE 1588-2008 (PTP v2), ST 2059-1, ST 2059-2
• NMOS IS-04 discovery and registration: v1.3.2, peer-to-peer via mDNS/DNS-SD
• NMOS IS-05 connection management: v1.1.2
• NMOS BCP-002-01: natural grouping
• NMOS BCP-004-01: receiver capabilities

Control

• Built in control panel: 6 buttons with spin knob control and 2.2" color display for device control and menu settings
• External control: RJ45 10 Gb/s Ethernet and USB-C

Display

• Built in 2.2 inch LCD for video, video standard, audio and Time Code monitoring plus menu settings

Power requirements

• Power supply: 1 x Internal 100 - 240 V_AC 50/60 Hz
• Power inputs: 1 x IEC C14 socket for AC power. 1 x RJ45 Ethernet connector for power from PoE power supplies
• Power usage: TBA

Environmental specifications

• Operating temperature: 5 to 40 °C 
• Storage temperature: -20 to 60 °C 
• Relative humidity: 0% to 90% non-condensing

Physical specifications

• Dimensions: 14 x 4.6 x 22.8 cm
• Weight: 1.049 kg

What's in the box

• Blackmagic 2110 IP Converter 3x3G, welcome wallet with QR code for software download