Blackmagic Design - Teranex Mini - IP Video 12G

Teranex Mini IP Video 12G by Blackmagic Design allows you to convert video to IP and route it over your existing ethernet network, or to convert IP video back to SDI. It uses standard Blackmagic Videohub software and hardware control panels to configure and switch IP video over ethernet as easily as SDI signals. This Teranex Mini features 12G-SDI and the low latency broadcast quality TICO codec to let you route HD over the built in gigabit ethernet connection or Ultra HD over 10G ethernet with an optional 10G SFP.

• SDI transmission: 270Mb, 1.5G, 3G, 6G, 12G.
• SD Video Standard: 525i59.94 NTSC, 625i50 PAL.
• HD Video Standard: 720p50, 720p59.94, 720p60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 1080PsF23.98, 1080PsF24, 1080i50, 1080i59.94, 1080i60.
• Ultra HD video standard: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p60. 
• 4K video standard: 4K DCI 23.98p, 4K DCI 24p, 4K DCI 25p.
• Features: real-time TICO encoding and decoding; Videohub routing control software included.

Connections

SDI Video Inputs 1 x 10-bit HD-SDI, 6G-SDI and 12G-SDI

SDI Video Outputs 2 x 10-bit HD-SDI, 6G-SDI and 12G-SDI

Ethernet Gigabit ethernet supports 3G-SDI up to 1080p60 using TICO encoding/decoding. Optional 10G optical data ethernet supporting Ultra HD up to 2160p60 using TICO encoding/decoding.

Multi Rate Support Auto detection of HD-SDI, 6G-SDI or 12G-SDI.

Updates USB 2.0 high speed (480Mb/s) interface or via Ethernet.

Configuration Ethernet or USB 2.0 for rmware updates and IP address setting.

Reclocking On all SDI outputs, auto switching between high de nition, 6G-SDI or 12G-SDI video.