Laserworld - PL-20.000RGB MK3 with ShowNET
Not available.
delivery is not available for this product.
Free shipping for orders over € 199 (within Europe)
Variants of this product
2,682.00 €
7,947.00 €
3,338.00 €
891.00 €
Product Details
The Laserworld PL-20.000RGB MK3 is an extremely powerful laser projector designed for professional entertainment lighting applications, including stages, concerts, shows and TV productions, music festivals, discos, DJ sets, clubs, bars, private parties, service and rental.
Equipped with a diode source, it has a good white balance, with linear color fading behavior and high visibility.
The Laserworld PL-20.000RGB MK3 units have a built-in network DAC for Showcontroller and Showeditor, but can also be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via an external ILDA interface. They also have a built-in memory with preset patterns, which can be easily activated via DMX and auto mode.
The beam diameter is approximately 6.5 mm and the divergence is 1.0 mrad. The guaranteed output power at aperture is 20,000 mW and the powers of the individual sources are: 6000 mW / 638 nm (red), 8000 mW / 520 nm (green), 8000 mW / 450 nm (blue). The fast scanners operate at a speed of 40 kpps @ 8° ILDA and can perform a max. scanning angle of 50°.
The projector is fully assembled with Sealed Housing technology and is cooled through external cooling fins (bottom part), thus reducing maintenance operations to a minimum.
This laser has an internal power supply for easy adjustment. On the back of the unit there are potentiometers for color settings, so that the color balance can be adjusted quickly. The potentiometers also allow you to set the X / Y axis offset. In addition, the scan safety limit can be set on the back of the laser.
The Laserworld PL-20.000RGB MK3 is equipped with a ShowNET network interface and free laser show software. Start programming your professional laser show with the free, intuitive Showeditor software. The Showcontroller software is also supported and can be purchased additionally. The integrated ShowNET enables direct input via ILDA and LAN. In addition to DMX, individual frames can be triggered via Art-Net. You can play back custom frames and shows from an integrated SD card (included in delivery), even in stand-alone mode.
User benefits
- Low-cost solution for powerful laser applications
- Brilliant colours with excellent linear colour fading behaviour
- Diverse control options
- Low maintenance thanks to Sealed Housing technology
- Free Showeditor software
Areas of use
- Large discotheques
- Stages (concerts or festivals)
- Long-distance shows
- Basic graphic projections
Technical characteristics
- Guaranteed power at aperture: 20,000 mW
- Power red: 6000 mW / 638 nm
- Power green: 8000 mW / 520 nm
- Power blue: 8000 mW / 450 nm
- Beam specifications: ca. 6.5 mm / 1.0 mrad
- Scanner: 40 kpps @ 8° ILDA
- Max. scan angle: 50°
- Laser source: diode
- Laser class: 4
- Operation modes: ILDA, DMX, LAN, ArtNet, ILDA streaming, integrated SD card, stand-alone, Master/Slave
- Basic patterns over 120 (layers, tunnels, fences, waves, etc.)
- Accessories: Incl. waterproof flight case, key, power cable, manual; full version Showeditor software license included
- IP rating: IP54
- Power supply: 85 - 250 VAC 50/60 Hz
- Power consumption: 750 W
- Dimensions (L x W x H): 44 x 31.2 x 22.5 cm
- Weight: 27 kg