Laserworld - PL-30.000RGB MK3 with ShowNET

An extremely powerful laser projector designed for professional entertainment lighting applications, including stages, concerts, TV shows and productions, music festivals, discos, DJs, night clubs, bars, private parties, service and rental companies.

Laserworld PL-30.000RGB MK3 laser show projector is equipped with diodes and has good white balance, with linear color fading behavior and high visibility. The Laserworld PL-30.000RGB MK3 units have a built-in network DAC for Showcontroller and Showeditor, but can also be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface. They also have a built-in memory with preset patterns, which can be easily activated via DMX and automatic mode.

Laserworld PL-30.000RGB MK3 comes with built-in ShowNET network interface and free laser show software. Start planning your professional laser show thanks to the intuitive Showeditor laser show software provided free with every new Laserworld PL-30.000RGB MK3. Showcontroller software is also supported and can be purchased additionally. The integrated ShowNET allows direct input via ILDA and LAN. In addition to DMX, individual frames can be triggered via ArtNet. You can play custom frames and shows from a built-in SD card (included), even in stand-alone mode.

The advantages of this projector are: a low-cost solution for laser applications requiring power, brilliant colors with excellent linear color fading behavior, ideal for long-distance shows and basic graphic projections. The beam has a diameter of approximately 6.5 mm and a divergence of 1.0 mrad. The guaranteed output power at the opening is 30,000 mW and the powers of the individual sources are: 9000 mW / 638 nm (red), 12,000 mW / 520 nm (green), 12,000 mW / 450 nm (blue). Fast scanners operate at a speed of 40 kpps @ 8° ILDA and can perform a max. scanning angle of 50°.

The projector is entirely assembled with Sealed Housing technology and is cooled through external cooling fins (bottom part). In this way, maintenance operations are reduced to a minimum. The luminaire has an internal power supply for easy adjustment. On the back of the unit are potentiometers for color settings, so that the chromatic balance can be quickly adjusted. The X/Y axis offset can also be set by potentiometers. Additionally, the scanning safety limit can be set on the back of the laser.

• Guaranteed power at aperture: 30,000 mW
• Power red: 7500 mW / 638 nm
• Power green: 8500 mW / 520 nm
• Power blue: 15000 mW / 450 nm
• Beam specifications: ca. 6.5 mm / 1.3 mrad
• Scanner: 40 kpps @ 8° ILDA
• Max. scan angle: 50°
• Laser source: diode
• Laser class: 4
• Operation modes: ILDA, DMX, LAN, ArtNet, ILDA streaming, integrated SD card, stand-alone, Master/Slave
• Basic patterns over 120 (layers, tunnels, fences, waves, etc.)
• Accessories: incl. waterproof flight case, key, power cable, manual; full version Showeditor software license included
• Power supply: 85 - 250 V_AC 50/60 Hz
• Power consumption: 900 W
• Dimensions (L x W x H): 495 x 341 x 220 mm
• Weight: 31 kg