MADRIX - LUNA 16

MADRIX LUNA 16 is a reliable and easy to use network node: an Art-Net Node / USB 2.0 DMX-512 interface with 16 x DMX-OUT, 1 x DMX-IN, for 19" 2U rack mounting.
Developed and made in Germany, MADRIX LUNA 16 reliably distributes DMX-512 data over long or short distances using Ethernet network or USB. Its sync mode makes sure that lighting effects look their best on the LEDs.

This device converts Art-Net data from Ethernet network to DMX-512. Any small or large project greatly benefits from dependable data distribution and efficient operation. XLR ports (5-pin, female) distribute the equal number of DMX universes per unit. 1 XLR port (5-pin, male) can be used for DMX input. Simply use several units at the same time for larger projects.
MADRIX software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions.

MADRIX LUNA 16 complies with the official Art-Net specifications and can be used as a regular Art-Net unit with your other consoles, controllers, or software solutions.
Device feature a fanless, noiseless, low-energy design, a durable metal case, and Neutrik plugs. 2 premounted brackets make rack mounting possible. 5 indicators quickly show the status of a device. The device is ready within seconds after startup.

HTP Merging is automatically available for two Art- Net sources. Its firmware is upgradable for future enhancements. Access and change specific device settings using the built-in web configuration page.

Technical characteristics

• Power supply: 100 – 240 V_AC 50/60 Hz, 0.4 A max., IEC C14 inlet
• Power consumption: < 5 W during normal operation
• BTU/h: 10.20 during normal operation
• Network protocols: Art-Net (I, II, 3, 4, incl. ArtSync), streaming ACN (sACN / ANSI E1.31)
• DMX512 (OUT): 8 x 512 DMX channels output
• DMX512 (IN): 1x 512 DMX channel input
• Ports (OUT): 5-pin, XLR, F., Neutrik
• Port (IN): 5-pin, XLR, M., Neutrik
• Ethernet: 1 x RJ45, Auto MDI-X, etherCON, 10/100 MBit/s (compatible with 1 GBit/s)
• USB: 1 x port, USB 2.0, type-B F. socket
• Handling: 5 status LEDs
• Case: metal enclosure (with attached brackets for 19″ rack mounting)
• Size: 19" x 2U 
• Temperature range: -10 to 60 °C (operating) | -20 to 70 °C (storage)
• Relative humidity: 20 to 80%, non-condensing (operating / storage)
• IP Rating: IP20
• Certificates: CE, EAC, FCC, RoHS
• Warranty: 5 years of limited manufacturer's warranty
• Dimensions (body only, L x W x H): 76 x 440 x 88 mm 
• Weight: 2 kg