Neutrik - NC3MXX-EMC

3 pole male EMC-XLR cable connector

The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with radio transmission or mobile phones. The design guarantees a continuous RF shield connection from the cable to the chassis connector housing via a circular capacitor around the cable shield. The circular capacitors act as high-pass filter with a cut-off frequency around 10 MHz.
An EMI suppression ferrite bead with 24 ohm at 1 MHz between pin 1 and the cable screen provides a low-pass filter for improved RF rejection.

• 3 pole M. XLR cable connector with integrated capacitive shield to shell connection
• Circular capacitor around the cable shield enables low-inductive shield connection to connector housing
• Cable shield - Pin 1 connection includes EMI suppression bead to block high frequencies
• Avoid ground loops as there is no LF-shield connection to ground
• Rugged zinc diecast shell, long lasting and durable
• Chuck type strain relief system for secure clamping of cables
• Boot with rubber gland gives high protection against bending stresses
• Branded with unique hologram - guarantees genuine and authentic Neutrik product

Product

• Title NC3MXX-EMC
• Connection Type XLR 
• Gender M. 

Electrical

• Capacitance between contacts ≤ 4 pF 
• Contact resistance ≤ 3 mohm 
• Dielectric strength 1,5 kV_DC 
• Insulation resistance > 10 Gohm (initial)
• Rated current per contact 5 A 
• Rated voltage < 50 V 

Mechanical

• Cable O.D. 3.5 - 8.0 mm 
• Insertion force ≤ 20 N 
• Withdrawal force ≤ 20 N 
• Lifetime > 1000 mating cycles 
• Wiresize max. 0.75 mm² 
• Wiresize max. 20 AWG 
• Wiring Solder contacts 
• Locking device Latch lock 

Material

• Boot Polyurethan 
• Contact plating 0.2 µm Au hard alloy over 2 µm Ni 
• Contacts Brass (CuZn39Pb3) 
• Insert Polyamide (PA 6.6 30 % GR) 
• Locking element Zinc diecast (ZnAl4Cu1) 
• Shell Zinc diecast (ZnAl4Cu1) 
• Shell plating Nickel 
• Strain relief Polyacetal (POM) 

Environmental

• Flammability UL 94 HB 
• Standard compliance IEC 61076-2-103
• Protection class IP 40 
• Solderability Complies with IEC 68-2-20 
• Temperature range -30 °C to +80 °C