Rondson - AM 20N

Preamplifier / amplifiers 20 W, 4 Inputs, 8 ohm, 25 / 70 / 100 V - 220 - 240 V AC / 12 V DC

(0)

395.50 €

- 38%

243.50 €

Pay in 4 interest-free payments of 60.88 € with Discover More

Unfortunately, the quantity you have selected exceeds the amount available in stock. No problem! We will go ahead and send you the available quantity. We will then send you the reminder approximately within ten days.

Unfortunately, the quantity you have selected exceeds the amount available in stock.

Condition: New

I accept the general conditions and the privacy policy.

Not available.

delivery is not available for this product.

Free shipping for orders over € 199 (within Europe)

Variants of this product

Rondson - AP 480/2

1,090.50 €

(0)

480 W power amplifier, 100 V line and low impedance, 230 V and 24 V DC power supply

Rondson - DA-500DP

1,407.00 €

(0)

2 CH x 500 W Class-D power amplifier, 100 V, 24 V DC power supply

Rondson - PA-4500

1,269.50 €

(0)

4 x 480 W Class-D power amplifier, 100 V

Rondson - AM 120A

471.00 €

(0)

Preamplifier / amplifiers 120 W, 6 Inputs, 8 ohm, 25 / 70 / 100 V - 220 - 240 V AC / 24 V DC

Audiophony - SLI1000.2 - Class D amplifier 2x1000W/4 Ohms

713.50 €

(0)

2 x 900 W on 4 ohm and 1000 W on 100 V stereo power amplifier, Class-D

SLI1000.2 - Class D amplifier 2x1000W/4 Ohms

FR Manuel d'instructions (6.38MB)

Documentation

Product Details

Integrated amplifier / mixer with 100 V line output, 20 W power. In addition to the speaker outputs at 25, 70 and 100 V, there is the 8 ohm low impedance one. Operation with 230 V_AC or 12 V_DC mains for AM 20N, AM 40N and 24 V_DC for AM 60N.

Main features

1 balanced DIN/jack/XLR microphone input MIC 1 (priority) via Talk Over or remote control
1 balanced microphone input (jack/XLR) MIC 2. These 2 inputs can be switched to Phantom-powered microphone (internal operation), a chime (2 tones "ding dong") can be activated by the MIC 1 microphone connected to the 5-pin DIN socket (RONDSON PA 100D call station) or to the stereo jack socket on the front panel (PA 100J call station).
1 telephone input, super priority emergency message
2 RCA AUX input (tuner, CD, etc.)
1 modulation output for connection of a power unit

Technical characteristics

Type	amplifier / preamplifier
Power supply	115 - 230 V_AC 50/60 Hz - switchable ±10%. 12 V_DC (maximum deviation 10%)
Output power	20 W_RMS 30 W max.
Speaker outputs	8 ohm - 25 / 70 / 100 V
Line Output	1 V, 600 ohm
Inputs	MIC 1 - 2: 1 mV, 250 ohm symmetrical power supply. configurable Phantom power supply AUX: 200 mV, 47 kohm asymmetrical TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable
Frequency response	MIC 1 - 2: 60 - 15,000 Hz ±3 dB AUX: 60 - 15,000 Hz ±3 dB TEL: 100 - 15,000 Hz ±3 dB
Total harmonic distortion	less than 1% at 1 kHz at RMS power
S/N ratio	All CCN volume settings: 75 dB below nominal power MIC 1 - 2: 60 dB below RMS power AUX: 70 dB below RMS power TEL: 70 dB below RMS power
Tone Settings	Bass: ±10 dB at 100 Hz - Treble: ± 10 dB at 10 kHz
Settings	MIC 1 - 2: volume control AUX: volume control - Tone: bass and treble TEL: entry level CHIME: inter ON/OFF 115 - 230 V: voltage switch
Display	Power on indicator light
Consumption	Mains: 100 W Battery: 4 A
Chime	2 tone Ding Dong preceding 1 microphone call
Priority	By detection / MIC 1 connected to DIN or jack
Priority levels	TEL/EMER &nbsp MIC 1 &nbsp MIC 2 &nbsp AUX &nbsp &nbsp &nbsp &nbsp &nbsp 3 &nbsp &nbsp &nbsp &nbsp &nbsp &nbsp &nbsp 2 &nbsp &nbsp &nbsp &nbsp &nbsp 1 &nbsp &nbsp &nbsp &nbsp &nbsp 1
Dimensions (W x D x H)	272 x 300 x 88 mm
Weight	5.7 kg
Option 19" rack mounting 2 U	Mounting brackets EQ 2040