RTI Lasers - Piko 100

The PIKO 100 is an ultra-high-power RGB laser, designed with RTI semiconductor technology and manufactured entirely in Germany.

It delivers 110 W of optical power to the laser modules and a minimum output power of 100 W, making it one of the highest-performing devices in the PIKO series. The laser beam has an extremely low divergence of 0.8 mrad and a diameter of approximately 10 mm, allowing the use of small, lightweight scanner mirrors, ideal for achieving high scanning speeds.

The system integrates a smart mainboard from LaserAnimation Sollinger, offering extensive control and configuration options via the included LA.toolbox software. The laser control is compatible with LAN, DMX, Art-Net, ILDA, and AVB protocols, thanks to the FB4 Max, which can be optionally replaced with the ShowNET Laser mainboard.

The device is fully protected against dust and splashes of water according to the IP65 rating, making it suitable for both indoor and outdoor environments, even in adverse weather conditions.

User benefits

• High power, over 100 W output
• Low divergence (0.8 mrad) and small beam diameter (10 mm)
• Advanced control via the included LA.toolbox software
• IP65 rated
• Made in Germany

Areas of use

• Large-scale events
• Concerts
• Festivals

Technical characteristics

• Typical wavelengths and specified laser output at source:
  • Red module (637 nm): 27 W
  • Green module (525 nm): 33 W
  • Blue module (455 nm): 60 W
• Minimum power at aperture: 100 W
• Guaranteed optical output at laser modules: 110 W
• Typical wavelengths: 637 nm, 525 nm, 455 nm
• Type: CW analog modulated
• Beam diameter: 10 mm  
• Beam divergence: 0.8 mrad 
• Scanner: 38 kpps 8°, max. scan angle 48°
• Control modes: 
  • By standard: FB4 offering ILDA, LAN (software), DMX and Art-Net control. Optionally available: AVB / TSN interface for data streaming via Ethernet
  • AIFF player function, stand-alone player, control software “LA.tools” for PC or Mac included
• IP rating: IP65
• Operating temperature: 5 to 40 °C
• Electrical input: universal input 86 - 264 V_AC 47 - 63 Hz
• Power consumption: 2800 W
• Laser safety:
  • Electronic mask to define protected areas in a laser projection using controlling software
  • Scanfail safety circuit
  • Key switch, Interlock, emission LED, status LED
• Standardized connectors:
  • AC mains connector: Neutrik powerCON TRUE1
  • Projector signal, analog: ILDA IN D-sub 25, differential inputs
  • Interlock: 3-pin XLR (external key switch, interlock)
  • DMX IN / Thru (5-pin XLR)
  • LAN (two ports on Internal switch)
• Included accessories: flight case
• Dimensions (L x W x H): 50.9 x 27.1 x 29.6 cm
• Weight (net): ca. 42 kg