Tarm 7 show laser projector is a full color RGB laser system with full analog color modulation and diode-only equipment, manufactured in Germany. The guaranteed output power is specified at 6500 mW after optics. It is equipped with a red (2400 mW / 638 nm), a green (1800 mW / 520 nm), and a blue (3000 mW / 450 nm) diode laser source. The benefits include 6500 mW guaranteed output power, a very fast maximum scan speed of 45kpps & ILDA 8° for graphics projection, high-precision diode arrays to provide an excellent beam divergence of less than 0.9 mrad for a low beam diameter of 3.5 mm, pure diode laser, novel method for increasing the beam precision of the single-mode diodes, beautiful colors and good color fading, very bright 638 nm single mode red. The housing of the tarm 7 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum. The mounting bracket allows for hanging and for upright mounting of the laser system. The tarm 7 units can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface. They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode. Tarm 7 is suitable for demanding show laser applications and graphics projections for clubs, bars, Djs, festivals, discoteques, live shows, laser shows, rental companies and medium-sized stages. It can be used by beginners as well as professionals.

• Guaranteed power at aperture: 6'500 mW
• Power Red: 2'400 mW / 638 nm
• Number of single red diodes: 12
• Power Green: 1'800 mW / 520 nm
• Number of single green diodes: 2
• Power Blue: 3'000 mW / 450 nm
• Number of single blue diodes: 2
• Beam Specifications (full angle): ca. 3.5 mm / 0.9 mrad
• Laser Sources: Diode
• Laser Class: 4
• Operation Modes: ILDA
• Scanner: 45 [email protected]° ILDA; optional as upgrade: CT-6210H incl. Rti RayScan driver: 60 [email protected]° ILDA, max. 68° (@35 kpps)
• Scan Angle max.: 50° (@30 kpps)
• Accessories: browser interface for calibration, power cable, manual, key, interlock connector
• Power Supply: 85 V - 250 V / AC
• Power Consumption: 320 W
• Dimensions: 320/260/140 mm
• Weight: 12 kg