Compact and lightweight 19” rack 4x150W amplifier. Its quiet operation allows the use in any environment. Stereo mode up to 8 speakers.

OVERVIEW

• Class-D amplifier
• Switched-mode power supply
• Mode selection: Stereo, Bridge or Parallel
• Independent limiter for each channel
• Extremely accurate and independent level settings for each channel
• LEDs indicators
• Convection cooled
• Combo XLR/Jack
• Unbalanced RCA outputs
• Binding post-jacks or Speakon® outputs
• Short-circuit, over current and high temperature independent protections for each channel
• 2x19" rack mount spaces

TECHNICAL SPECIFICATIONS

• Stereo Max power: 4 Ω RMS stereo power (minimum): 4 x 150 W RMS; 8 Ω RMS stereo power: 4 x 80 W RMS;
• Mono bridged Max power: 8 Ω bridged power (minimum): 2 x 230 W RMS;
• Signal-to-noise ratio Less than 90 dB
• Input sensitivity: 4 dBu +/-2 dB
• Distortion: THD at 1kHz 1/2 rated power Less than 0.1%; Slew rate: - 65 dB at 1 kHz;
• Frequency response (4 ?/1 W): +0.5 dB ; 20 Hz-20 kHz
• Input impedance : unbalanced 15 kΩ / Balance 30 kΩ 
• Clip: 0 dBr
• Cooling: Convection cooled
• Input connectors: Combo XLR/Jack
• Output connectors: Binding post-jacks + 4-pole Speakon®
• Front control panel: AC power switch, Channel 1 and 2Volume
• Rear control panel: Mode selection button
• Indicators: Protect (red) / Clip (yellow) / Signal (green)
• Protections: Short-circuits, over current and high temperature protected
• Power supply: 100/230 V AC - 50/60 Hz
• Dimensions: 482 mm x 44 mm x 330 mm
• NetWeight: 4.3 kg