DJ Power - WP-2

WP-2 is the first bubble machine produced by DJPOWER. It is based on a patented jet design that blows many vivid smoke-filled bubbles with less smoke outside. It also features 6 x 8 W RGBY LEDs, two fans to make the smoke bubble fly higher and further, built-in LCD control, 3-pin & 5-pin DMX control and stores bubble and smoke liquid in two separate tanks. To prevent the bubble liquid from degrading and thus ensure high quality bubbles, the same is well stored in the tank. Excess fluid will flow into the holding tank instead of falling to the floor. With this feature, the unit can also be mounted hanging, shooting bubbles everywhere.

• Jet design, produce lots of bubbles filled with fog
• Well-designed heating system releases the fog evenly and purely, no fluid dropping off
• Two fans make the fog bubble fly higher, further
• Bubble and fog fluid storage in separately
• The excess bubble fluid will flow back to waste fluid tank
• Combining with Led light
• Built-in LCD control, 3-pin and 5-pin DMX control

Input voltage	220 - 240 VAC 50/60 Hz
Breaker	5 A / 250 V
Total power consumption	650 W
LED power	8 W × 6 pcs
LED color	RGBY
Heat-up time	appr. 3 min
Max output volume	appr. 4,500 cfm
Max output height	appr. 4 m
Max output distance	appr. 3.5 m
Haze fluid consumption rate	appr. 78 min/L
Bubble fluid consumption rate	appr. 26 min/L
Bubble tank capacity	2.8 L
Haze fluid tank capacity	1.3 L
DMX channel	12
Net weight	14.5 kg
Gross weight	17 kg
Machine dimensions	426 x 317 x 394 mm
Packing dimensions	535 × 435 × 500 mm
Consumables	PRO-P and PRO-C